D-Link 5000 Series Cli Reference Manual page 945

Layer 2/3 managed 10g/25g/40g/100g data center switches
Hide thumbs Also See for 5000 Series:
Table of Contents

Advertisement

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
(192.0.2.20, 229.10.0.1), 00:04:35/177, Flags: T
Joins/Prunes:20/1, Reg/Reg-Stop:100/0
Incoming interface: VLAN 2, RPF Address: 0.0.0.0
Outgoing interface list:
VLAN 5
VLAN 6
The following is an example of the output for the source parameter in the PIM Sparse mode.
(U16)#show ip mroute source 192:0.2.20
IP Multicast Routing Table
Flags: C - Connected,J - Received PIM (*,G) Join,
R - RP-bit set, F - Register flag, T - SPT-bit set
Timers: Uptime(HH:MM:SS)/Expiry(SSS)
Protocol: PIMSM
(192.0.2.20, 229.10.0.1), 00:04;35/177, Flags: T
Joins/Prunes:20/1, Reg/Reg-Stop:100/0
Incoming interface: VLAN 2, RPF Address: 0.0.0.0
Outgoing interface list:
VLAN 5
VLAN 6
Display Parameters
If the detail, group, or source parameters are used in the PIM Sparse mode, then the command will
display the following fields:
Flags
Outgoing interface flags
Timers:Uptime/Expiry
Counters
00:03:25/0
Joins:20
00:00:10/0
Joins:5
00:03:25/0
Joins:20
00:00:10/0
Joins:5
F: Register flag. Indicates that the source connected router is
sending registers to RP. This flag can be seen only on
Designated Router connected to source.
T: SPT-bit set. Indicates that packets have been received on the
shortest path source tree.
R: RP-bit set. Indicates that the (S, G) entry is pointing toward
the RP. This flag typically indicates a prune state along the
shared tree for a particular source.
C: Connected. A member of the multicast group is directly
connected to the interface.
J: Received PIM (*,G) Join on this interface.
Uptime: Indicates per interface how long (in hours, minutes, and
seconds) the entry has been in the IP multicast routing table.
Expires: Indicates per interface how long (in seconds) until the
entry will be removed from the IP multicast routing table
Joins: Indicates the number of (*,G) or (S,G) joins received for
the given entry.
Prunes: Indicates the number of (*,G) or (S,G) prunes received
for the given entry.
939

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents