Download Print this page

D-Link Web Smart DES-1228P User Manual

D-link systems switch user manual
Hide thumbs

Advertisement

Quick Links

Version 2.00

Advertisement

loading

  Related Manuals for D-Link Web Smart DES-1228P

  Summary of Contents for D-Link Web Smart DES-1228P

  • Page 1 Version 2.00...
  • Page 2 Reproduction in any manner whatsoever without the written permission of D-Link Computer Corporation is strictly forbidden. Trademarks used in this text: D-Link and the D-Link logo are trademarks of D-Link Computer Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation.
  • Page 3: Table Of Contents

    Add(+), Delete(-) and Discover the device ... 16 Device List... 16 Configuration ... 18 Smart Wizard Configuration... 18 Password Settings... 18 SNMP Settings ... 19 System Settings... 20 Identify Web-based Management Utility ... 20 D-Link Web Smart Switch User Manual...
  • Page 4 Configuration > Port Mirroring ... 33 Configuration > LLDP Settings (Only for DES-1228P)... 34 Power over Ethernet (PoE) > PoE Port Settings (Only for DES-1228P) ... 34 Power over Ethernet (PoE) > PoE System Settings (Only for DES-1228P) ... 35 QoS >...
  • Page 5: About This Guide

    Reproduction in any manner whatsoever without the written permission of D-Link Corporation is strictly forbidden. Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
  • Page 6: Hardware Installation

    Rack Installation The switch can be mounted in an EIA standard size 19-inch rack, which can be placed in a wiring closet with other equipment. To install, attach the mounting brackets to the switch’s side panels (one on each side) and secure them with the screws provided (please note that these brackets are not designed for palm size switches).
  • Page 7: Step 3 - Plugging In The Ac Power Cord

    Figure 3 – Mount the Switch in the rack or chassis Step 3 – Plugging in the AC Power Cord Users may now connect the AC power cord into the rear of the switch and to an electrical outlet (preferably one that is grounded and surge protected).
  • Page 8: Getting Started

    Switch. Management Options The D-Link Web Smart Switch can be managed through any port on the device by using the Web-based Management Utility or through any PC using the SmartConsole Utility. If you want to manage only one D-Link Web Smart Switch, the Web-Based Management Utility is the better option.
  • Page 9: Login Web-Based Management Utility

    Login Web-based Management Utility In order to login and configure the switch via an Ethernet connection, the PC must have an IP address in the same subnet as the switch. For example, if the switch has an IP address of 192.168.0.1, the PC should have an IP address of 192.168.0.x (where x is a number between 2 and 254), and a subnet mask of...
  • Page 10 CD-Rom) and click OK. Follow the on-screen instructions to install the utility. Upon completion, go to Start > Programs > D-Link SmartConsole Utility and open the SmartConsole Utility. Just connect the Smart Switch to the same L2 network segment of your PC and use the SmartConsole Utility to discover the Smart Switches.
  • Page 11: Product Introduction

    2 of the Gigabit ports are combo with the SFP which support both 1000 and 100M fiber connection. Power Over Ethernet Option. Switch model DES-1228P provides built-in 802.3af Power over Ethernet for network sites needing to run power over the network cables. Each the 24 10/100BASE-TX Ethernet ports of this switch provides up to 15.4 watts power for connected wireless access points, IP phones and other PoE-...
  • Page 12: Front Panel

    Power LED: The Power LED lights up when the Switch is connected to a power source. CPU LED: When the CPU LED is blinking, then the switch is in the normal condition. If the CPU LED is off or stays in solid light state that means the system might have crashed or firmware upgrade has failed.
  • Page 13: Rear Panel

    Power LED: The Power LED lights up when the Switch is connected to a power source. CPU LED: When the CPU LED is blinking, then the switch is in the normal condition. If the CPU LED is off or stays in solid light state that means the system might have crashed or firmware upgrade has failed.
  • Page 14: Rear Panel

    3 Product Introduction D-Link Web Smart Switch User Manual Rear Panel Figure 13 – DES-1252 Rear Panel Power: The power port is where to connect the AC power cord.
  • Page 15: Smartconsole Utility

    4 SmartConsole Utility SmartConsole Utility D-Link SmartConsole Utility allows the administrator to quickly discover all D-Link smart switches which are in the same domain the PC, collect traps and log messages, and quick access to some basic configurations of the switch.
  • Page 16: Log

    The trap icon in the SmartConsole Settings will change while receiving new trap messages please see below for detail description File By clicking on this icon you will see below options: Figure 16 – SmartConsole Log Figure 17 – SmartConsole Trap Icon Description No new traps New traps was received D-Link Web Smart Switch User Manual...
  • Page 17: Help

    4 SmartConsole Utility D-Link Web Smart Switch User Manual Figure 18 – SmartConsole File Monitor Save: To record the setting of the Device List as default for the next time the SmartConsole Utility is used. Monitor Save As: To record the setting of the Device List in an appointed filename and file path.
  • Page 18: Device Configurations

    Device Settings Select a switch from the Device List, then clicking on this icon the Device Settings window will pop up. Here you can configure the Product Name, IP Address, Gateway, Subnet Mask, System Name, Location, Trap IP, Switch Group Interval, and DHCP Setting of the Switch.
  • Page 19 DHCP Refresh: If the DHCP enabled switch in Device List shows the default IP, which means the device doesn’t get IP from DHCP server successfully. Select this switch and click the DHCP refresh icon, the DHCP refresh will popup.
  • Page 20: Add(+), Delete(-) And Discover The Device

    4 SmartConsole Utility Web Access Select a switch from the Device List, then clicking this icon an internet browser will pop up (default is Internet Explorer). Here you can configure the Switch through the Web-based Management Utility. You may also get into the Web-based Management Utility by double clicking the device in the device list.
  • Page 21 Subnet Mask: Shows the Subnet Mask setting of the device. Gateway: Shows the Gateway setting of the device. Device Group Interval: Shows the intervals (in seconds) that the Switch will be discovered in the SmartConsole Device List Firmware version: Show the current Firmware version of this device.
  • Page 22: Configuration

    5 Configuration D-Link Web Smart Switch User Manual Configuration Through a Web-based Management Utility, the features and functions of the D-Link Web Smarty Switch can be configured for optimum use. Smart Wizard Configuration Before entering the Web-based Management Utility, When The Smart Wizard will guide you to quick configure some functions.
  • Page 23: Snmp Settings

    5 Configuration D-Link Web Smart Switch User Manual SNMP Settings The SNMP Setting allows you to quick enable/ disable the SNMP function and configure the SNMP community name. For detail SNMP function description please see “Setup Menu > System > SNMP Settings”.
  • Page 24: System Settings

    IP address in the Web browser and make sure your PC is in the same subnet with the switch. See Management Utility for detail description. D-Link Web Smart Switch User Manual Login Web-based...
  • Page 25 At the upper right of the screen you can see your username and current IP address. Under your username is the Logout button. Click this to end this session. Finally, by clicking on the D-Link logo at the upper left of the screen you will be linked to the official D-Link website.
  • Page 26: Tool Menu

    The Tool Menu offers global function controls such as Reset, Configuring Backup and Restoration, Firmware Backup and Upload, and System Reboot. Reset Provide a safe reset option for the Switch. All configurations will be reset to default. Click Factory Reset to restore the settings to default values. Configure Backup & Restore Allow the current configuration settings to be saved to a file (not including the password), and if necessary, to be restored from a backup.
  • Page 27: System Reboot

    Utility again. Group Interval: The D-Link Web Smart Switch will routinely send report packets to the SmartConsole Utility in order to maintain the correct data shown. The user can configure the Group Interval to control the time routine.
  • Page 28: System > Trap Settings

    By configuring the Trap Setting, it allows SmartConsole Utility to monitor specified events on this Web-Smart Switch. By default, Trap Setting is disabled. When the Trap Setting is enabled, enter the Destination IP address of the managing station that will receive trap information.
  • Page 29: System > Port Settings

    SNMP enables network management stations to read and modify the settings of gateways, routers, switches, and other network devices. Use SNMP to configure system features for proper operation, monitor performance and detect potential problems in the Switch or LAN.
  • Page 30: System > Password Access Control

    Trap Setting: Traps are messages that alert network personnel of events that occur on the Switch. Such events can be as serious as a reboot (someone accidentally turned the Switch OFF), or less serious events such as a port status change. The Switch can generate traps and send them to the trap recipient (i.e. network administrator).
  • Page 31: Configuration > 802.1Q Vlan

    5 Configuration D-Link Web Smart Switch User Manual Figure 42 – System > Password Access Control Configuration > 802.1Q VLAN A VLAN is a group of ports that can be anywhere in the network, but communicate as though they were in the same area.
  • Page 32: Configuration >Asymmetric Vlan

    Figure 47 – Configuration > 802.1Q VLAN > Asymmetric VLAN Click Example to open the page and follow the instructions below to configure Asymmetric VLAN Figure 45 – Configuration > 802.1Q VLAN > Example VIDs D-Link Web Smart Switch User Manual...
  • Page 33: Configuration > 802.1Q Management Vlan

    3 and 4 groups are incapable of sharing information with each other. Configuration > 802.1Q Management VLAN 802.1Q Management VLAN setting allows you to transfer the authority of the switch from the default VLAN to others created by users. Doing so makes managing the whole network more flexible.
  • Page 34: Configuration > Trunking

    IGMP snooping can help reduce cluttered traffic on the LAN. With IGMP snooping enabled globally, the Web-Smart Switch will forward multicast traffic only to connections that have group members attached. Please note that IGMP will not alter or route IP multicast packets. To send IP multicast packets across subnetworks a multicast routing protocol will be necessary.
  • Page 35 Figure 52 – Configuration > IGMP Snooping Configuration By default, IGMP is disabled. If enabled, the IGMP Global Settings will need to be entered: Querier State: D-Link Smart Switch is able to send out the IGMP Queries to check the status of multicast clients. Default is disabled.
  • Page 36: Configuration > 802.1D Spanning Tree

    Figure 55 – Configuration > Spanning Tree By default, Spanning Tree is disabled. If enabled, the Switch will listen for BPDU packets and its accompanying Hello packet. BPDU packets are sent even if a BPDU packet was not received. Therefore,...
  • Page 37: Configuration > Port Mirroring

    Root Path Cost: Shows the root path cost. In addition to 802.1D global settings, the D-Link Web smart switch allows the user to configure 802.1D STP by ports. Select From Port / To Port to specify the ports you want to configure.
  • Page 38: Configuration > Lldp Settings (Only For Des-1228P)

    Current (mA), Classification, Port Status. You can select From Port / To Port to control the PoE functions of a port. DES-1228P will auto disable the ports if a port current is over 350mA while other ports remain active Figure 57 – Configuration > LLDP...
  • Page 39: Power Over Ethernet (Poe) > Poe System Settings (Only For Des-1228P)

    Power Limit: This function allows you to manually set the port power current limitation to be given to the PD. To protect the DES-1228P and the connected devices, the power limit function will disable the PoE function of the port when the power is overloaded. Select from "Class 1", "Class 2", "Class 3" and "Auto" for the power limit.
  • Page 40 Figure 61 – QoS > DSCP Priority Settings Select QoS Mode: D-Link Smart Switch allows the user to prioritize the traffic based on the 802.1p priority in the VLAN tag or the DSCP (Differentiated Services Code Point) priority in the IP header. Choose one to prioritize the packets.
  • Page 41: Security > Trusted Host

    5 Configuration remaining packets. D-Link Smart Switch system’s weight of priority levels are: 8 (Highest), 4 (High), 2 (Middle) and 1 (Low) packet. By default, the queuing mechanism is Strict. You may select From Port / To Port to configure the priority of each port.
  • Page 42 5 Configuration D-Link Web Smart Switch User Manual Figure 64 – Security > Broadcast Storm Control...
  • Page 43: Security > 802.1X Settings

    SuppTimeout: Sets the switch-to-client retransmission time for the EAP-request frame. Default is 12 seconds. ServerTimeout: Sets the amount of time the switch waits for a response from the client before resending the response to the authentication server. Default is 16 seconds.
  • Page 44: Security > Mac Address Table > Static Mac

    Security > Mac Address Table > Dynamic Forwarding Table For each port, this table displays the Mac address of each packet passing through the Switch. To add a Mac address to the Static Mac Address List, click the Add checkbox then press Apply associated with the identified packet.
  • Page 45: Monitoring > Statistics

    5 Configuration D-Link Web Smart Switch User Manual Monitoring > Statistics The Statistics screen displays the status of each port packet count. Figure 68 – Monitoring > Statistics Refresh: To renew the details collected and displayed. Clear Counter: To reset the details displayed.
  • Page 46: Monitoring > Cable Diagnostics

    ‧Test Failed means some other errors occurred during cable diagnostics. Please select the same port and test again. Cable Fault Distance (meters): Indicates the distance of the cable fault from the Switch port, if the cable is less than 2 meters, it will show “No Cable”.
  • Page 47: Appendix A - Ethernet Technology

    Appendix A - Ethernet Technology Appendix A - Ethernet Technology This chapter will describe the features of the DES-1228P and provide some background information about Ethernet/Fast Ethernet/Gigabit Ethernet switching technology. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing the same packet structure, format, and support for CSMA/CD protocol, full duplex, and management objects, but with a tenfold increase in theoretical throughput of over 100-Mbps Fast Ethernet and a hundredfold increase over 10-Mbps Ethernet.
  • Page 48 Appendix A - Ethernet Technology D-Link Web Smart Switch User Manual Power and Data are integrated onto the same cable. Supporting category 5/5e up to 100 Meters, PoE will provide power to PoE compatible devices, such as IP telephones, wireless LAN access points, and IP security cameras.
  • Page 49: Appendix B - Technical Specifications

    WDM Transceivers Supported: - DEM-330T (TX-1550/RX-1310nm) - DEM-330R (TX-1310/RX-1550nm) - DEM-331T (TX-1550/RX-1310nm) - DEM-331R (TX-1310/RX-1550nm) Power over Ethernet (DES-1228P Only) PoE Capable Ports: Port 1-24 Supplies power up to 15.4W per port, compliant with IEEE802.3af standards D-Link Web Smart Switch User Manual...
  • Page 50 Appendix B - Technical Specifications Trap setting for destination IP, system events, fiber port events, twisted-pair port events Port access control Web-based configuration restoration Web-based firmware backup/upload Firmware upgrade using SmartConsole Utility Reboot D-Link Web Smart Switch User Manual backup...
  • Page 51: Technical Support

    ECHNICAL UPPORT You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the service period, and warranty confirmation service, during the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.
  • Page 52 Technical Support You can find software updates and user documentation on the D-Link websites. If you require product support, we encourage you to browse our FAQ section on the Web Site before contacting the Support line. We have many FAQ’s which...
  • Page 53 0,12€/Min aus dem Festnetz der Deutschen Telekom. Telefonische technische Unterstützung erhalten Sie Montags bis Freitags von 09.00 bis 17.30 Uhr. Unterstützung erhalten Sie auch bei der Premiumhotline für D-Link Produkte unter der Rufnummer 09001-475767 Montag bis Freitag von 6-22 Uhr und am Wochenende von 11-18 Uhr.
  • Page 54: Assistance Technique

    Vous trouverez la documentation et les logiciels les plus récents sur le site Vous pouvez contacter le service technique de D-Link par notre site internet ou par téléphone. Support technique destiné aux clients établis en France: Assistance technique D-Link par téléphone : N°...
  • Page 55 Asistencia Técnica Puede encontrar las últimas versiones de software así como documentación técnica en el sitio web de D-Link. D-Link ofrece asistencia técnica gratuita para clientes residentes en España durante el periodo de garantía del producto. Asistencia Técnica de D-Link por teléfono:...
  • Page 56 Supporto tecnico Gli ultimi aggiornamenti e la documentazione sono disponibili sul sito D-Link. Supporto tecnico per i clienti residenti in Italia D-Link Mediterraneo S.r.L. Via N. Bonnet 6/B 20154 Milano Supporto Tecnico dal lunedì al venerdì dalle ore 9.00 alle ore 19.00 con orario continuato...
  • Page 57 Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within Benelux for the duration of the warranty period on this product. Benelux customers can contact D-Link technical support through our website, or...
  • Page 58: Pomoc Techniczna

    Pomoc techniczna Najnowsze wersje oprogramowania i dokumentacji użytkownika można znaleźć w serwisie internetowym firmy D-Link. D-Link zapewnia bezpłatną pomoc techniczną klientom w Polsce w okresie gwarancyjnym produktu. Klienci z Polski mogą się kontaktować z działem pomocy technicznej firmy D-Link za pośrednictwem Internetu lub telefonicznie.
  • Page 59 Technická podpora Aktualizované verze software a uživatelských příruček najdete na webové stránce firmy D-Link. D-Link poskytuje svým zákazníkům bezplatnou technickou podporu Zákazníci mohou kontaktovat oddělení technické podpory přes webové stránky, mailem nebo telefonicky Web: http://www.dlink.cz/suppport/ E-mail: support@dlink.cz Telefon: 224 247 503 Telefonická...
  • Page 60 Technikai Támogatás Meghajtó programokat és frissítéseket a D-Link Magyarország weblapjáról tölthet le. Telefonon technikai segítséget munkanapokon hétfőtől-csütörtökig 9.00 – 16.00 óráig és pénteken 9.00 – 14.00 óráig kérhet a (1) 461-3001 telefonszámon vagy a support@dlink.hu emailcímen. Magyarországi technikai támogatás : D-Link Magyarország...
  • Page 61 Teknisk Support Du kan finne programvare oppdateringer og bruker dokumentasjon på D-Links web sider. D-Link tilbyr sine kunder gratis teknisk support under produktets garantitid. Kunder kan kontakte D-Links teknisk support via våre hjemmesider, eller på tlf. Teknisk Support: D-Link Teknisk telefon Support:...
  • Page 62 Teknisk Support Du finder software opdateringer og bruger- dokumentation på D-Link’s hjemmeside. D-Link tilbyder gratis teknisk support til kunder i Danmark i hele produktets garantiperiode. Danske kunder kan kontakte D-Link’s tekniske support via vores hjemmeside eller telefonisk. D-Link teknisk support over telefonen: Tlf.
  • Page 63 Teknistä tukea asiakkaille Suomessa: D-Link tarjoaa teknistä tukea asiakkailleen. Tuotteen takuun voimassaoloajan. Tekninen tuki palvelee seuraavasti: Arkisin klo. 9 - 21 numerosta 0800-114 677 Internetin kautta Ajurit ja lisätietoja tuotteista. http://www.dlink.fi Sähköpostin kautta voit myös tehdä kyselyitä.
  • Page 64 Teknisk Support På vår hemsida kan du hitta mer information om mjukvaru uppdateringar och annan användarinformation. D-Link tillhandahåller teknisk support till kunder i Sverige under hela garantitiden för denna produkt. Teknisk Support för kunder i Sverige: D-Link Teknisk Support via telefon: 0770-33 00 35 Vardagar 08.00-20.00...
  • Page 65 Você pode encontrar atualizações de software e documentação de http://www.dlink.pt utilizador no site de D-Link Portugal A D-Link fornece suporte técnico gratuito para clientes no Portugal durante o período de vigência de garantia deste produto. Suporte Técnico para clientes no Portugal: Assistência Técnica:...
  • Page 66 Τεχνική Υποστήριξη Μπορείτε να βρείτε software updates και πληροφορίες για τη χρήση των προϊόντων στις ιστοσελίδες της D-Link Η D-Link προσφέρει στους πελάτες της δωρεάν υποστήριξη στον Ελλαδικό χώρο Μπορείτε να επικοινωνείτε με το τμήμα τεχνικής υποστήριξης μέσω της ιστοσελίδας ή μέσω τηλεφώνου...
  • Page 67 Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers in Monday to Friday 8:00am to 8:00pm EST Saturday 9:00am to 1:00pm EST http://www.dlink.com.au e-mail: Monday to Friday 9:30AM to 7:00PM http://www.dlink.co.in/support/productsupport.aspx...
  • Page 68 Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers in Tel: +202-2919035 or +202-2919047 Sunday to Thursday 9:00am to 5:00pm http://support.dlink-me.com e-mail: Tel: +98-21-88822613 Sunday to Thursday 9:00am to 6:00pm http://support.dlink-me.com...
  • Page 69 Техническая поддержка Обновления программного обеспечения и документация доступны на Интернет-сайте D-Link. D-Link предоставляет бесплатную поддержку для клиентов в течение гарантийного срока. Клиенты могут обратиться в группу технической поддержки D-Link по телефону или через Интернет. Техническая поддержка D-Link: +495-744-00-99 Техническая поддержка через Интернет...
  • Page 70 El servicio de soporte técnico tiene presencia en numerosos países de la Región Latino América, y presta asistencia gratuita a todos los clientes de D-Link, en forma telefónica e internet, a través de la casilla soporte@dlinkla.com Soporte Técnico Help Desk Argentina: Teléfono: 0800-12235465 Lunes a Viernes 09:00 am a 22:00 pm...
  • Page 71 Você pode encontrar atualizações de software e documentação de usuário no site da D-Link Brasil www.dlinkbrasil.com.br. A D-Link fornece suporte técnico gratuito para clientes no Brasil durante o período de vigência da garantia deste produto. Suporte Técnico para clientes no Brasil: Telefone São Paulo +11-2185-9301...
  • Page 72 D-Link 友訊科技 台灣分公司 技術支援資訊 如果您還有任何本使用手冊無法協助您解決的產品相關問題,台灣 地區用戶可以透過我們的網站、電子郵件或電話等方式與D-Link台灣 地區技術支援工程師聯絡。 D-Link 免付費技術諮詢專線 0800-002-615 服務時間:週一至週五,早上8:30到晚上9:00 (不含周六、日及國定假日) 網 站:http://www.dlink.com.tw 電子郵件:dssqa_service@dlink.com.tw 如果您是台灣地區以外的用戶,請參考D-Link網站全球各地 分公司的聯絡資訊以取得相關支援服務。 產品保固期限、台灣區維修據點查詢,請參考以下網頁說明: http://www.dlink.com.tw 產品維修: 使用者可直接送至全省聯強直營維修站或請洽您的原購買經銷商。...
  • Page 73 Dukungan Teknis Update perangkat lunak dan dokumentasi pengguna dapat diperoleh pada situs web D-Link. Dukungan Teknis untuk pelanggan: Dukungan Teknis D-Link melalui telepon: Tel: +62-21-5731610 Dukungan Teknis D-Link melalui Internet: Email : support@dlink.co.id Website : http://support.dlink.co.id...
  • Page 74 技術支持 您可以在 D-Link 的官方網站找到產品的軟件升級和使用手冊 办公地址:北京市东城区北三环东路 36 号 环球贸易中心 B 座 26F 02-05 室 邮编: 100013 技术支持中心电话:8008296688/ (028)66052968 技术支持中心传真:(028)85176948 维修中心地址:北京市东城区北三环东路 36 号 环球贸易中心 B 座 26F 02-05 室 邮编: 100013 维修中心电话:(010) 58257789 维修中心传真:(010) 58257790 网址:http://www.dlink.com.cn...
  • Page 75: International Offices

    URL: www.dlink.ca TEL: +30 210 9914512 FAX:+30 210 9916902 URL: www.dlink.gr Europe (U. K.) D-Link (Europe) Ltd Hungary D-Link House, Abbey Road Park Royal, London NW10 7BX Rákóczi út 70-72 United Kingdom HU-1074 Budapest, TEL: +44 (0)20 8955 9000 Hungary...

This manual is also suitable for:

Web smart des-1228Web smart des-1252