D-Link 5000 Series Cli Reference Manual page 234

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
cpu-traffic direction {tx | rx | both} match {srctcp | dsttcp} port [mask mask]
no cpu-traffic direction {tx | rx | both} match {srctcp | dsttcp} port [mask mask]
Parameters
both
rx
tx
srctcp
dsttcp
port
mask mask
Default
The default is None.
Command Mode
Global Config
5-108 cpu-traffic mode
Configure CPU-traffic mode. RX/TX direction packets are matched when the mode is enabled.
No command disables CPU-traffic mode.
cpu-traffic mode
no cpu-traffic mode
Parameters
None
Default
The default is Disabled.
Command Mode
Global Config
5-109 cpu-traffic trace
Select to match both ingress and egress packets.
Indicates the egress packet.
Indicates the ingress packet.
Select to configure SRCTCP filter options.
Select to configure DSTTCP filter options.
Indicates the port value (0 – 65535).
(Optional) Indicates the designated subnet mask address. Default:
255.255.255.255.
228