D-Link 5000 Series Cli Reference Manual page 231

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Configure the destination IP address-specific filter. The statistics and/or the traces of the configured filters
are used for the matching IP/Mask packet.
No command disables the configured destination IP address filter.
cpu-traffic direction {tx | rx | both} match dstmac macaddress [mask mask]
no cpu-traffic direction {tx | rx | both} match dstmac macddress [mask mask]
Parameters
both
rx
tx
macaddress
mask mask
Default
The default is None.
Command Mode
Global Config
5-104 cpu-traffic direction match dsttcp
Cnfigure the source or destination TCP port-specific filter. The statistics and/or the traces of the
configured filters are used for the matching TCP port packet.
No command removes the configured source/destination TCP port filter.
cpu-traffic direction {tx | rx | both} match {srctcp | dsttcp} port [mask mask]
no cpu-traffic direction {tx | rx | both} match {srctcp | dsttcp} port [mask mask]
Parameters
both
rx
tx
srctcp
dsttcp
port
mask mask
Select to match both ingress and egress packets.
Indicates the egress packet.
Indicates the ingress packet.
Indicates the MAC address for the dstmac filter.
(Optional) Select the IP address for the subnet mask.
Default: 255.255.255.255.
Select to match both ingress and egress packets.
Indicates the egress packet.
Indicates the ingress packet.
Select to configure SRCTCP filter options.
Select to configure DSTTCP filter options.
Indicates the port value (0 – 65535).
(Optional) Select the IP address for the subnet mask.
225