D-Link 5000 Series Cli Reference Manual page 528

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Dynamic Limit
Static Limit
Violation Trap Mode
Sticky Mode
5-516 show port-security dynamic
This command displays the dynamically locked MAC addresses for the port.
show port-security dynamic {slot/port | lag lag-id}
Parameters
slot/port
lag lag-id
Default
The default is None.
Command Mode
Privileged EXEC
Display Parameters
MAC Address
5-517 show port-security static
This command displays the statically locked MAC addresses for port. Instead of slot/port, lag lag-id can
be used as an alternate way to specify the LAG interface. lag lag-id can also be used to specify the LAG
interface where lag-id is the LAG port number.
show port-security static {slot/port | lag lag-id}
Parameters
slot/port
lag lag-id
Maximum dynamically allocated MAC Addresses.
Maximum statically allocated MAC Addresses.
Whether violation traps are enabled.
Displays whether or not mode is enabled.
(Optional) Display port security information for a specific interface.
(Optional) Enter into interface lag mode.
MAC Address of dynamically locked MAC.
(Optional) Display port security information for a specific interface.
(Optional) Enter into interface lag mode.
522