D-Link 5000 Series Cli Reference Manual page 911

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
lifetime
valid-lifetime
preferred-lifetime
infinite
Default
The default is None.
Command Mode
IPv6 DHCP Pool Config
Example
The following example of the command shows how a user can configure an IPv6 address prefix for the
IPv6 configuration pool pool1.
(Switch)#configure
(Switch)(Config)#ipv6 dhcp pool pool1
(Switch)(Config-dhcp6s-pool)#address prefix 2001::/64
(Switch)(Config-dhcp6s-pool)#exit
8-132 domain-name (IPv6)
Sets the DNS domain name that is provided to a DHCPv6 client by a DHCPv6 server. The DNS domain
name is configured to provide stateless server support. The domain name can be no more than 31 alpha-
numeric characters in length. A DHCPv6 pool can include multiple domain names, up to a maximum of 8.
The no command removes a DHCPv6 domain name from a DHCPv6 pool.
domain-name domain
no domain-name domain
Parameters
domain
Default
The default is None.
Command Mode
IPv6 DHCP Pool Config
(Optional) Sets a length of time for the hosts to remember router
advertisements. If configured, both valid and preferred lifetimes must be
configured.
The amount of time, in seconds, the prefix remains valid for the
requesting router to use. The range is from 60 through 4294967294.
The preferred-lifetime value cannot exceed the valid-lifetime value.
The amount of time, in seconds, that the prefix remains preferred for the
requesting router to use. The range is from 60 through 4294967294.
The preferred-lifetime value cannot exceed the valid-lifetime value.
An unlimited lifetime.
Indicates the DNS domain name as provided by a DHCPv6 server.
905