D-Link 5000 Series Cli Reference Manual page 565

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
5-568 show mac-address-table multicast
This command displays the Multicast Forwarding Database (MFDB) information. lf you enter the
command with no parameter, the entire table is displayed. You can display the table entry for one MAC
Address by specifying the MAC address as an optional parameter.
show mac-address-table multicast macaddr
Parameters
macaddr
Default
The default is None.
Command Mode
Privileged EXEC
Example
If one or more entries exist in the multicast forwarding table, the command output looks similar to the
following.
(Routing)#show mac-address-table multicast
VLAN ID MAC Address
-------- ------------------ -------- -------
1 01:00:5E:01:02:03
--More-- or (q)uit
Display Parameters
VLAN ID
MAC Address
Source
Enter a 6 byte MAC Address.
Source Type
Filter Static
The VLAN in which the MAC address is learned.
A multicast MAC address for which the switch has forwarding or filtering
information. The format is 6 two-digit hexadecimal numbers that are
separated by colons, for example 01:23:45:67:89:AB.
The component that is responsible for this entry in the Multicast
Forwarding Database. The source can be IGMP Snooping, GMRP, and
Static Filtering.
559
Description Interface
------------ ----------
Mgmt Config Fwd:
0/1,
0/2,
0/3,
0/4,
0/5,
0/6,
0/7,
0/8,
0/9,
0/10,
Fwd Interface
-------------
Fwd:
0/1,
0/2,
0/3,
0/4,
0/5,
0/6,
0/7,
0/8,
0/9,
0/10,