D-Link 5000 Series Cli Reference Manual page 453

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Command Mode
User EXEC
5-402 debug vpc peer-link control-message ckpt
Enable debug traces for the checkpointing control messages exchanged between the MLAG devices on
the peer link. . For error, only the communication errors are traced. Exchanged control messages can be
traced through msg.
debug vpc peer-link control-message ckpt {error | msg [receive | transmit] | normal | verbose }
Parameters
error
msg
receive
transmist
normal
verbose
Default
The default is None.
Command Mode
User EXEC
5-403 debug vpc peer detection
Enable debug traces for the dual control plane detection protocol. Traces are available when the DCPDP
transmits or receives detection packets to or from the peer VPC switch.
debug vpc peer detection
Parameters
None
Default
The default is None.
Error Tracing Level.
(Optional) Trace Messages exchanged.
Enter trace Received Messages.
Enter trace Transmitted Messages.
(Optional) Normal Tracing Level.
Verbose Tracing Level.
447