D-Link 5000 Series Cli Reference Manual page 19

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Command Prompt
Mode
Switch (Interface Loopback
id)#
Switch (Interface tunnel id)#
Switch (Interface slot/port
(startrange - slot/port
(endrange))#
Line Console Switch (config-line)#
Line SSH Switch (config-ssh)#
Line Telnet Switch (config-telnet)#
AAA IAS User Switch (config-IAS-User)#
Config
Mail Server Switch (Mail-Server)#
Class Map Switch (config-class-map)#
Config
Router OSPF Switch (config-router)#
Config
BGP Router Switch (config-router)#
Config
IPv6 Address
Switch (config-router-af)#
Family
Radius Dynamic Switch (config-radius-da)#
Authorization
Config
Switch (Config-mac-access-
MAC Access-list
Config
list)#
|Pv6 Access-list Switch (config-ipv6-acl)#
Config
Management
Switch (config-macal)#
Access-list
Config
Mode Description
This mode can also be used to manage
the operation of a range of interfaces. For
example, for the range of interfaces from
ports 0/2 to 0/4, the prompt is displayed as
follows:
(Routing) (Interface 0/2-0/4)#
Includes commands that can be used to
configure outbound telnet settings and
console login/enable authentication, as
well as to configure console interface
settings.
Includes commands that can be used to
configure SSH login/enable authentication.
Includes commands that can be used to
configure telnet login/enable
authentication.
Includes commands that can be used to
configure a password for a user in the IAS
database.
Includes commands that can be used to
configure the e-mail server.
Includes the commands for QoS class
map configuration for IPv4.
Includes the commands for OSPF
configuration.
Includes the commands for BGP4
configuration.
Includes the commands for IPv6 address
family configuration.
Includes the commands for Radius
Dynamic Authorization.
Includes the commands for creating a
MAC Access-List and allows the user to
enter the mode containing the MAC
Access-List configuration commands.
Includes the commands for creating an
IPv6 Access-List and allows the user to
enter the mode containing the IPv6
Access-List configuration commands.
Includes the commands for creating a
Management Access-List and allows the
user to enter the mode containing the
Management Access-List configuration
commands.
13