D-Link 5000 Series Cli Reference Manual page 87

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
4-89 show passwords configuration
This command is used to show the configured password management settings.
show passwords configuration
Parameters
None
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following is an example of the command.
(Routing)#show passwords configuration
Passwords Configuration
---------------------------------
Minimum Password Length........................ 1
Password Aging (days).......................... 0
Password History............................... 0
Lockout Attempts............................... 0
Password Strength Check........................ Disable
Minimum Password Uppercase Letters............. 5
Minimum Password Lowercase Letters............. 5
Minimum Password Numeric Characters............ 2
Minimum Password Special Characters............ 2
Maximum Password Repeated Characters........... 1
Maximum Password Consecutive Characters........ 0
Minimum Password Character Classes............. 4
Password Exclude Keywords...................... <none>
Display Parameters
Minimum Password Length
Password Aging
Password History
Lockout Attempts
Indicates the minimum number of characters that are required when
changing passwords.
Indicates the period of time (in days) for which a password will be valid.
Indicates the number of passwords to be stored in order to prevent
reuse.
Indicates the number of failed password login attempts allowed before
lockout.
81