D-Link 5000 Series Cli Reference Manual page 725

Layer 2/3 managed 10g/25g/40g/100g data center switches
Hide thumbs Also See for 5000 Series:
Table of Contents

Advertisement

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Track Interface
State
---------------
----------
<0/1>
down
TrackRoute (pfx/len)
-------------------------
10.10.10.1/255.255.255.0
Display Parameters
IP Address
VMAC Address
Authentication Type
Priority
Configured Priority
Advertisement Interval
Pre-Empt Mode
Administrative Mode
Accept Mode
State
7-107 show ip vrrp interface brief
Display information about each virtual router configured on the switch.
show ip vrrp interface brief
Parameters
None
Default
The default is None.
Command Mode
Privileged EXEC
User EXEC
DecrementPriority
--------------------
10
State
DecrementPriority
----------
--------------------
down
10
Configured IP address for the Virtual router.
VMAC address of the specified router.
Authentication type for the specific virtual router.
Priority value for the specific virtual router, taking into account any
priority decrements for tracked interfaces or routes.
Priority configured through the ip vrrp vrid priority 1-254 command.
Advertisement interval in seconds for the specific virtual router.
Preemption mode configured on the specified virtual router.
Status X of the specific router (Enable or Disable).
When enabled, the VRRP Master can accept ping packets sent to one
of the virtual router's IP addresses.
State (Master/backup) of the virtual router.
719

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents