D-Link 5000 Series Cli Reference Manual page 940

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Example
The following is an example of the CLI display output for the command.
(Routing)#show ip mcast
Admin Mode....................................... Disabled
Protocol State................................... Non-Operational
Table Max Size .................................. 2048
Protocol......................................... No protocol enabled.
Multicast forwarding cache entry count .......... 0
Display Parameters
Admin Mode
Protocol State
Table Max Size
Protocol
Multicast Forwarding
Cache Entry Count
9-6 show ip mcast boundary
Shows all the administrative scoped multicast boundaries that are configured. The slot /port argument
corresponds to either a physical routing interface or to a VLAN routing interface. The keyword VLAN is
utilized, instead of the slot/port format, to directly specify the VLAN ID of the routing VLAN.
show ip mcast boundary {slot/port | vlan 1-4093 | all}
Parameters
slot/port
vlan
all
Default
The default is None.
Command Mode
•
Privileged EXEC
•
User EXEC
The administrative status of multicast. Possible values are enabled or
disabled.
The current state of the multicast protocol. Possible values are
Operational or Non-Operational.
The maximum number of entries allowed in the multicast table.
The multicast protocol running on the router. Possible values are
PIMDM, PIMSM, or DVMRP.
The number of entries in the multicast forwarding cache.
Indicates an interface in slot/port format.
Indicates an interface in VLAN format (1-4093).
Indicates all for all interfaces.
934