D-Link 5000 Series Cli Reference Manual page 362

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
5-274 show interfaces switchport
Display the Switch port configuration for a selected interface mode. All interfaces are displayed if there is
not specific selection.
show interfaces switchport {access | err-disabled | trunk | general} [slot/port]
Parameters
access
err-disabled
general
Trunk
slot/port
Default
The default is None.
Command Mode
Privileged EXEC
Example
(Switching)#show interfaces switchport access 0/1
Intf PVID
----- -----
0/1 1
(Switching)#show interfaces switchport trunk 0/6
Intf PVID Allowed Vlans List
----- ----- --------------------
0/6 1 All
(Switching)#show interfaces switchport general 0/5
Intf PVID Ingress
Filtering
----- ----- ---------
0/5 1 Enabled
(Switching)#show interfaces switchport general
Display the switchport information for interfaces configured in access
mode.
Display the error disable status of interfaces.
Display the switchport information for interfaces configured in general
mode.
Display the switchport information for interfaces configured in trunk
mode.
(Optional) Enter an interface in slot/port format.
Acceptable Untagged
Frame Type Vlans
---------- --------
Admit All 7
356
Tagged Forbidden Dynamic
Vlans Vlans
-------- --------
10-50,55 9,100-200 88,96
Vlans
--------