D-Link 5000 Series Cli Reference Manual page 749

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Command Mode
Router Config
7-140 clear ip ospf
Disable and reenable OSPF for the specified virtual router. If no virtual router is specified, the default
router is disabled and re-enabled.
clear ip ospf [vrf vrf-name]
Parameters
vrf vrf-name
Default
The default is None.
Command Mode
Privileged EXEC
7-141 clear ip ospf configuration
Reset the OSPF configuration to factory defaults for the specified virtual router. If no virtual router is
specified, the default router is cleared.
clear ip ospf configuration [vrf vrf-name]
Parameters
vrf vrf-name
Default
The default is None.
Command Mode
Privileged EXEC
7-142 clear ip ospf counters
Reset global and interface statistics for the specified virtual router. lf no virtual router is specified, the
global and interface statistics are reset for the default router.
(Optional) Indicates the OSPF protocol of a virtual router.
(Optional) Indicates the OSPF protocol of a virtual router.
743