D-Link 5000 Series Cli Reference Manual page 980

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Default
The default is 2.
Command Mode
Interface Config
9-52 ip igmp startup-query-interval
Sets the interval between General Queries that are sent upon startup of a single interface or a range of
interfaces. The value of the time interval value is given in seconds.
The no command resets the interval between General Queries that are sent upon startup of the interface
back to the default value.
ip igmp startup-query-interval 1-300
no ip igmp startup-query-interval
Parameters
None
Default
The default is 31.7.
Command Mode
Interface Config
9-53 show ip igmp
Shows the system-wide IGMP information.
show ip igmp
Parameters
None
Default
The default is None.
Command Mode
•
Privileged EXEC
•
User EXEC
974