D-Link 5000 Series Cli Reference Manual page 617

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Reference Group Id
6-41 show openflow table-status
This command is used to show the supported OpenFlow tables and the reported usage information for
the tables.
show openflow table-status {openflow10 | opnflow13)
Parameters
openflow10
openflow13
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following is an example of the CLI display output for the command.
(Routing)#show openflow table-status openflow10
Flow Table....................................... 1
Flow Table Name.................................. Forwarding Database
Maximum Size..................................... 64
Number of Entries................................ 8
Hardware Entries................................. 7
Software-Only Entries............................ 1
Waiting for Space Entries........................ 0
Flow Insertion Count............................. 1
Flow Deletion Count.............................. 0
Insertion Failure Count.......................... 0
Flow Table Description:
The forwarding database maps non-multicast MAC addresses and the ports on which these
addresses are located.
The following is an example of the CLI display output for the command.
(Routing)#show openflow table-status openflow13
Flow Table....................................... 60
Flow Table Name.................................. Openflow 1.3
Maximum Size..................................... 1920
References the Indirect group ID and used for Select group only.
Indicates OpenFlow 1.0.
Indicates OpenFlow 1.3
611