D-Link 5000 Series Cli Reference Manual page 59

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Command Mode
Privileged EXEC
4-50 linuxsh
The linuxsh command can be used to access the Linux shell. The exit command can be used to exit the
Linux shell and go back to the D-LINK OS CLI. By default, a given shell session will timeout after five
minutes with no activity. This timeout value can be changed, however, by using the command
timeout" in the Line Console mode.
linuxsh [ip-port]
Parameters
ip-port
Default
2324
Command Mode
Privileged EXEC
4-51 show loginsession
This command is used to display the current Telnet, SSH, and serial port connections to the switch
Truncated user names will be displayed as a result of using this command.
show loginsession
Parameters
None
Default
The default is None.
Command Mode
Privileged EXEC
(Optional) Indicates the number of the IP port upon which the telnet
daemon listens for connections. This ip-port number must be an integer
from 1 to 65535 (default 2324).
53
"telnetcon