D-Link 5000 Series Cli Reference Manual page 807

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
7-212 show bfd neighbors
Display the BFD adjacency list showing the active BFD neighbors.
show bfd neighbors [details]
Parameters
details
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following shows an example of the command.
(Router)#show bfd neighbors
Admin Mode: Enabled
OurAddr NeighAddr
--------------- ---------------
192.168.20.1 192.168.20.2
2601: :1 2001: :2
(Router)#show bfd neighbors details
Admin Mode: Enabled
Our IP address................................... 2.1.1.1
Neighbor IP address.............................. 2.1.1.2
State............................................ Up
Interface........................................ 0/15
Uptime........................................... 0:0:0:10
Registered Protocol.............................. BGP
Local Diag....................................... None
Demand mode...................................... FALSE
Minimum transmit interval........................ 100
Minimum receive interval......................... 100
Actual tx interval............................... 100
Actual tx echo interval.......................... 0
Detection interval multiplier.................... 3
(Optional) Provides additional details with the routing protocol BFD has
registered and displays the Admin Mode status as Enabled or Disabled.
State Interface
----- ----------
Up 1/0/77
Up 1/0/78
801
Uptime
----------
0:0:21:30
0:0:0:18