D-Link 5000 Series Cli Reference Manual page 39

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Parameters
None
Default
The default is None.
Command Mode
•
Privileged EXEC
•
User EXEC
Example
The following provides an example of the CLI display output for the command
(Switching)#show network ipv6 dhcp statistics
DHCPv6 Client Statistics
-------------------------
DHCPv6 Advertisement Packets Received............ 0
DHCPv6 Reply Packets Received.................... 0
Received DHCPv6 Advertisement Packets Discard.... 0
Received DHCPv6 Reply Packets Discarded.......... 0
DHCPv6 Malformed Packets Received................ 0
Total DHCPv6 Packets Received.................... 0
DHCPv6 Solicit Packets Transmitted............... 0
DHCPv6 Request Packets Transmitted............... 0
DHCPv6 Renew Packets Transmitted................. 0
DHCPv6 Rebind Packets Transmitted................ 0
DHCPv6 Release Packets Transmitted............... 0
Total DHCPv6 Packets Transmitted................. 0
Display Parameters
DHCPv6 Advertisement
Packets Received
DHCPv6 Reply Packets
Received
Received DHCPv6
Advertisement Packets
Discarded
Received DHCPv6 Reply
Packets Discarded
DHCPv6 Malformed
Packets Received
Total DHCPv6 Packets
Received
DHCPv6 Solicit Packets
Transmitted
Indicates the number of DHCPv6 Advertisement packets that have been
received on the network interface.
Indicates the number of DHCPv6 Reply packets that have been
received on the network interface.
Indicates the number of DHCPv6 Advertisement packets that have been
discarded on the network interface.
Indicates the number of DHCPv6 Reply packets that have been
discarded on the network interface.
Indicates the number of malformed DHCPv6 packets that have been
received on the network interface.
Indicates the total number of DHCPv6 packets that have been received
on the network interface.
Indicates the number of DHCPv6 Solicit packets that have been
transmitted on the network interface.
33