D-Link 5000 Series Cli Reference Manual page 929

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
show ipv6 dhcp snooping binding [{static | dynamic}] [interface slot/port] [vlan 1-4093]
Parameters
static
dynamic
interface slot/port
vlan 1-4093
Default
The default is None.
Command Mode
•
Privileged EXEC
•
User EXEC
Example
The following is an example of the CLI display output for the command.
(switch)#show ipv6 dhcp snooping binding
Total number of bindings: 2
MAC Address
--------------------
00:02:B3:06:60:80
00:0F:FE:00:13:04
Display Parameters
MAC Address
IPv6 Address
VLAN
Interface
Type
Lease time (Secs)
8-158 show ipv6 dhcp snooping database
Shows the DHCP Snooping configuration that is related to the database persistency.
show ipv6 dhcp snooping database
(Optional) Restricts the output according to static entries.
(Optional) Restricts the output according to DCHP snooping.
(Optional) Restricts the output according to a specific interface.
(Optional) Restricts the output according to VLAN (1-4093).
IPv6 Address VLAN
--------------- -----
2000::1/64 10
3000::1/64 10
Displays the MAC address for the binding that was added. The MAC
address is the key to the binding database.
Displays the valid IPv6 address for the binding rule.
The VLAN for the binding rule.
The interface to add a binding into the DHCP snooping interface.
Binding type; statically configured from the CLI or dynamically learned.
The remaining lease time for the entry.
923
Interface Type
---------- -----
0/1
0/1
Lease time (Secs)
-----------------
86400
86400