D-Link 5000 Series Cli Reference Manual page 552

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following shows example CLI display output for the command.
(Routing)#show lldp med remote-device all
LLDP MED Remote Device Summary
Local Interface
---------------
0/8
0/9
0/10
0/11
0/12
Display Parameters
Local Interface
Remote ID
Device Class
5-547 show lldp med remote-device detail
Use this command to display detailed information about remote devices that transmit current LLDP MED
data to an interface on the system.
show lldp med remote-device detail slot/port
Parameters
slot/port
Default
The default is None.
Command Mode
Privileged EXEC
Remote ID Device Class
---------- ---------------
1 Class I
2 Not Defined
3 Class II
4 Class III
5 Network Con
The interface that received the LLDPDU from the remote device.
An internal identifier to the switch to mark each remote device to the
system.
Device classification of the remote device.
Enter an interface in slot/port format.
546