D-Link 5000 Series Cli Reference Manual page 869

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Default
The default is None.
Command Mode
Privileged EXEC
8-79 default-information originate (OSPFv3)
Controls the advertisement of default routes.
The no command resets the advertisement of default routes.
default-information originate [always] [metric 0-16777214] [metric-type {1 | 2}]
no default-information originate [metric] [metric-type]
Parameters
always
metric
metric-type {1 | 2}
Default
The default is as follows:
•
metric – unspecified
•
type – 2
Command Mode
Router OSPFv3 Config
8-80 default-metric (OSPFv3)
Sets a default for the metric of distributed routes.
The no command resets a default for the metric of distributed routes.
default-metric 1-16777214
no default-metric
Parameters
None
Indicates the default route is always advertised.
Indicates the cost for reaching the rest of the world through this route
(0-16777214).
Indicates how the cost of a neighbor metric is determined, default: type
2.
863