D-Link 5000 Series Cli Reference Manual page 740

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
non-comparable
Default
The default is None.
Command Mode
Router OSPF Config
7-125 area nssa no-redistribute (OSPF)
Configure the NSSA Area Border router (ABR) so that learned external routes will not be redistributed to
the NSSA.
No command disables the NSSA ABR so that learned external routes are redistributed to the NSSA.
area areaid nssa no-redistribute
no area areaid nssa no-redistribute
Parameters
areaid
Default
The default is None.
Command Mode
Router OSPF Config
7-126 area nssa no-summary(OSPF)
Configure the NSSA so that summary LSAs are not advertised into the NSSA.
No command disables nssa from the summary LSAs.
area areaid nssa no-summary
no area areaid nssa no-summary
Parameters
areaid
Configure the Metric Type as non-comparable.
Indicates an area ID.
Indicates an area ID.
734