D-Link 5000 Series Cli Reference Manual page 271

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
5-170 show mbuf total
Display the memory buffer (MBUF) Utilization Monitoring parameters.
show mbuf total
Parameters
None
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following shows an example of the command.
(Routing) #show mbuf total
Mbufs Total...................................... 246
Mbufs Free....................................... 246
Mbufs Rx Used.................................... 0
Mbufs Rx Norm Used............................... 0
Mbufs Rx Mid2 Used............................... 0
Mbufs Rx Mid1 Used............................... 0
Mbufs Rx Mid0 Used............................... 0
Mbufs Rx High Used............................... 0
Mbufs Tx Used.................................... 0
Total Rx Norm Alloc Attempts..................... 0
Total Rx Mid2 Alloc Attempts..................... 37989
Total Rx Mid1 Alloc Attempts..................... 13044
Total Rx Mid0 Alloc Attempts..................... 0
Total Rx High Alloc Attempts..................... 0
Total Tx Alloc Attempts.......................... 16480
Total Rx Norm Alloc Failures..................... 0
Total Rx Mid2 Alloc Failures..................... 0
Total Rx Mid1 Alloc Failures..................... 0
Total Rx Mid0 Alloc Failures..................... 0
Total Rx High Alloc Failures..................... 0
Total Tx Alloc Failures.......................... 0
5-171 show msg-queue
Display message queues.
show msg-queue
265