D-Link 5000 Series Cli Reference Manual page 977

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Configures the version of IGMP used for a single interface or a range of interfaces. The value for the
version parameter must be 1, 2, or 3.
The no command resets the version of IGMP used to the default value.
ip igmp version version
no ip igmp version
Parameters
version
Default
The default is 3.
Command Mode
Interface Config
9-46 ip igmp last-member-query-count
Sets the number of Group-Specific Queries sent out by a given interface or a range of interfaces before
the router assumes that no local members are present on the interface.
The no command resets the number of Group-Specific Queries back to the default value.
ip igmp last-member-query-count 1-20
no ip igmp last-member-query-count
Parameters
None
Default
The default is None.
Command Mode
Interface Config
9-47 ip igmp last-member-query-interval
Configures the Maximum Response Time for Group-Specific Queries that are sent in response to Leave
Group messages. The Maximum Response Time value can be configured for a single interface or a
range of interfaces.
The no command resets the Maximum Response Time back to the default value.
Indicates the IGMP or IGMP proxy version (1-3).
971