D-Link 5000 Series Cli Reference Manual page 428

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
0/78 32768
Display Parameters
System Priority
Actor Admin Key
Port Priority
Admin State
5-371 show lacp partner
Display LACP partner attributes.
show lacp actor (slot/port | all}
Parameters
slot/port
all
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following shows an example of the command.
(Switch)#show lacp partner all
Sys System
Intf Pri ID
----- ----- ------------------
0/1 0 00:00:00:00:00:00
0/2 0 00:00:00:00:00:00
0/3 0 00:00:00:00:00:00
0/4 0 00:00:00:00:00:00
0/5 0 00:00:00:00:00:00
0/6 0 00:00:00:00:00:00
0/7 0 00:00:00:00:00:00
0/8 0 00:00:00:00:00:00
0/9 0 00:00:00:00:00:00
0 128
The value of the system priority Key.
The value of the actor administrative Key.
The value assigned to the Aggregation (priority) Port.
The values of the administrative state as transmitted by the Actor in
LACPDUs.
Enter an interface in slot/port format.
Enter all for all interfaces.
Admin
Key
------
0
0
0
0
0
0
0
0
0
422
ACT|AGG|LTO
Prt Prt Admin
Pri Id State
------ ------ ---------------
0 0 PSV|IND|LTO
0 0 PSV|IND|LTO
0 0 PSV|IND|LTO
0 0 PSV|IND|LTO
0 0 PSV|IND|LTO
0 0 PSV|IND|LTO
0 0 PSV|IND|LTO
0 0 PSV|IND|LTO
0 0 PSV|IND|LTO