D-Link 5000 Series Cli Reference Manual page 236

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Src TCP parameters................................ 0 0
Dst TCP parameters................................ 0 0
Src UDP parameters................................ 0 0
Dst UDP parameters................................ 0 0
Src IP parameters................................. 0.0.0.0.0.0.0.0
Dst IP parameters................................. 0.0.0.0.0.0.0.0
Src MAC parameters................................ 00:00:00:00:00:00:00:00:00:00:00:00
Dst MAC parameters................................ 00:00:00:00:00:00:00:00:00:00:00:00
Custom filter parameters1......................... Offset=0x0 Value=0x0 Mask=0x0
Custom filter parameters2......................... Offset=0x0 Value=0x0 Mask=0x0
Custom filter parameters3......................... Offset=0x0 Value=0x0 Mask=0x0
Direction RX:
Filter Options.................................... N/A
Interface......................................... N/A
Src TCP parameters................................ 0 0
Dst TCP parameters................................ 0 0
Src UDP parameters................................ 0 0
Dst UDP parameters................................ 0 0
Src IP parameters................................. 0.0.0.0.0.0.0.0
Dst IP parameters................................. 0.0.0.0.0.0.0.0
Src MAC parameters................................ 00:00:00:00:00:00:00:00:00:00:00:00
Dst MAC parameters................................ 00:00:00:00:00:00:00:00:00:00:00:00
Custom filter parameters1......................... Offset=0x0 Value=0x0 Mask=0x0
Custom filter parameters2......................... Offset=0x0 Value=0x0 Mask=0x0
Custom filter parameters3......................... Offset=0x0 Value=0x0 Mask=0x0
5-111 show cpu-traffic interface
Displays interface statistics for configured filters. Filter specific statistics (e.g., stp, udld, arp etc) can be
displayed. Do not specify a filter to display all configured filters. Additionally, the source/destination (IP,
TCP, UDP or MAC) with filters can be used as command option to obtain statistics.
show cpu-traffic interface {slot/port | all | cpu} filter
Parameters
Intf-range slot/port
all
cpu
Default
The default is None.
Command Mode
Privileged EXEC
Indicates the slot/port interface.
Select to display the statistics for all interfaces.
Indicates the CPU port packets.
230