D-Link 5000 Series Cli Reference Manual page 723

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Zero Priority Packets
Received
Zero Priority Packets Sent
Invalid Type Packets
Received
Address List Errors
Invalid Authentication Type
Authentication Type
Mismatch
Packet Length Errors
7-105 show ip vrrp
Display whether VRRP functionality is enabled or disabled on the switch. It also displays some global
parameters which are required for monitoring.
show ip vrrp
Parameters
None
Default
The default is None.
Command Mode
•
Privileged EXEC
•
User EXEC
Example
The following is an example of the CLI display output for the command.
(Router)#show ip vrrp
Admin Mode....................................... Enable
Router Checksum Errors........................... 0
Router Version Errors............................ 0
Router VRID Errors............................... 0
Total number of VRRP packets received by virtual router with a priority
of '0'.
Total number of VRRP packets sent by the virtual router with a priority of
'0'.
Total number of VRRP packets received by the virtual router with invalid
'type' field.
Total number of VRRP packets received for which address list does not
match the locally configured list for the virtual router.
Total number of VRRP packets received with unknown authentication
type.
Total number of VRRP advertisements received for which 'auth type' not
equal to locally configured one for this virtual router.
Total number of VRRP packets received with packet length less than
length of VRRP header.
717