D-Link 5000 Series Cli Reference Manual page 65

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Default
•
defaultList: This list only contains the method none and is used by the console.
•
networkList: This list only contains the method local and is used by telnet and SSH.
Command Mode
Global Config
Example
The following is an example of the command.
(switch)(config)# aaa authentication login default radius local enable none
4-55 authorization commands
This command is used to apply a command authorization method list to an access method (such as
console, telnet, or ssh).
The no command is used to remove command authorization from a line config mode.
authorization commands {listname | default}
no authorization commands { listname | default }
Parameters
listname
default
Default
The default is None.
Command Mode
•
Line console
•
Line telnet
•
Line SSH
Example
The following is an example of the command.
(Switching)(config)#line console
(Switching)(config-line)#authorization command list2
(Switching)(config-line)#
•
local: The local username database is used for authentication.
•
none: No authentication is used.
•
radius: The list of all RADIUS servers is used for authentication.
•
tacacs: The list of all TACACS+ servers is used for authentication.
Select authorization for all user executed commands.
Select to provide executed authorization.
59