D-Link 5000 Series Cli Reference Manual page 368

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
switchport protected groupid
no switchport protected groupid
Parameters
groupid
Default
The default is Unprotected.
Command Mode
Interface Config
5-283 show switchport protected
Display the status of all interfaces both protected and unprotected.
show switchport protected groupid
Parameters
groupid
Default
The default is None.
Command Mode
•
Privileged EXEC
•
User EXEC
Example
The following shows an example of the command.
(Routing) #show switchport protected 0
Name.............................................
Member Ports :
Display Parameters
Group ID
Name
Enter Group ID.
Enter Group ID.
Protected port group identifier.
Given text string of group can be up to 32 alphanumeric characters
including blank characters. The default is blank.
362