D-Link 5000 Series Cli Reference Manual page 728

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Command Mode
•
Global Config
•
Virtual Router Config
7-111 show bootpdhcprelay
Display the BootP/DHCP Relay information for the virtual router. If no router is specified, information for
the default router is displayed.
show bootpdhcprelay [vrf vrf-name]
Parameters
vrf vrf-name
Default
The default is None.
Command Mode
•
Privileged EXEC
•
Global Config
Example
The following is an example of the CLI display output for the command.
(Routing) #show bootpdhcprelay
Maximum Hop Count.............................. 5
Minimum Wait Time(Seconds)..................... 0
Admin Mode..................................... Disable
Circuit Id option mode......................... Enable
Display Parameters
Maximum Hop Count
Minimum Wait Time
(Seconds)
Admin Mode
Circuit Id Option Mode
Display the value of BOOTP/DHCP relay parameters of a virtual router.
Maximum allowable relay agent hops.
Minimum wait time.
lndicates whether relaying of requests is enabled or disabled.
The DHCP circuit ID option which may be enabled or disabled.
722