D-Link 5000 Series Cli Reference Manual page 883

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
8-102 ipv6 ospf retransmit-interval
Sets the OSPF retransmit interval, which is specified in seconds, for the given interface or a range of
interfaces. The value indicates the number of seconds between retransmissions of link-state
advertisement for adjacencies belonging to the given router interface. The value is likewise used when
retransmitting database description and link-state request packets.
The no command resets the OSPF retransmit interval for the specified interface to the default value.
ipv6 ospf retransmit-interval 0-3600
no ipv6 ospf retransmit-interval
Parameters
None
Default
The default is 5 seconds.
Command Mode
Interface Config
8-103 ipv6 ospf transmit-delay
Sets the OSPF Transit Delay, which is specified in seconds, for the specified interface or a range of
interfaces. ln addition, this command sets the estimated number of seconds that it takes to transmit a link
state update packet over the given interface.
The no command resets the OSPF Transit Delay for the specified interface to the default value.
ipv6 ospf transmit-delay 0-3600
no ipv6 ospf transmit-delay
Parameters
None
Default
The default is 1 second.
Command Mode
Interface Config
877