D-Link 5000 Series Cli Reference Manual page 297

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
description string
type log
owner string
trap community
Default
The default is None.
Command Mode
Global Config
Example
The following is an output example.
(Routing)(Config)#rmon event 1 log description test
The following is an example of the output.
(Routing)(Config)#no rmon event 1
5-192 show rmon
This command displays the entries in the RMON alarm table.
show rmon {alarms | alarm alarm-index | collection | events | hcalarm | hcalarms | history | log |
statistics }
Parameters
alarms
alarm alarm-index
collection
events
hcalarm
hcalarms
history
log
statistics
single event. The range is 1 to 65535.
(Optional) A description for the event entry. The default is alarmEvent.
(Optional) Event notification type. Possible values are None (default),
Log, SNMP Trap, Log and SNMP Trap.
(Optional) String describing owner entry. The default is monitorEvent.
(Optional) Specified SNMP community by this octet string which is used
to send an SNMP trap. The default is public.
Show RMON alarm entries.
Display the alarm table.
Displays the configured requested group of statistics.
Displays the RMON event table.
Show RMON high capacity alarm entries.
Displays the high capacity alarm table.
Displays the RMON history ethernet statistics.
Display the RMON logging table.
Display RMON ethernet statistics.
291