D-Link 5000 Series Cli Reference Manual page 544

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Display Parameters
Interface
Port ID
Port Description
5-535 show lldp local-device detail
Use this command to display detailed information about the LLDP data a specific interface transmits.
show lldp local-device detail slot/port
Parameters
slot/port
Default
The default is None.
Command Mode
Privileged EXEC
Display Parameters
Interface
Chassis ID Subtype
Chassis ID
Port ID Subtype
Port ID
System Name
System Description
Port Description
System Capabilities
Supported
System Capabilities
Enabled
Management Address
The interface in a slot/port format.
The port ID associated with this interface.
The port description associated with the interface.
Enter an interface in slot/port format.
The interface that sends the LLDPDU.
The type of identification used in the Chassis ID field.
The chassis of the local device.
The type of port on the local device.
The port number that transmitted the LLDPDU.
The system name of the local device.
Describes the local system by identifying the system name and versions
of hardware, operating system, and networking software supported in
the device.
Describes the port in an alpha-numeric format.
Indicates the primary function(s) of the device.
Shows which of the supported system capabilities are enabled.
The type of address and the specific address the local LLDP agent uses
to send and receive information.
538