D-Link 5000 Series Cli Reference Manual page 419

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Configuration is available for single, a range, or all interfaces.
No command reverts load balancing configuration to default.
port-channel load-balance {1 | 2 | 3 | 4 | 5 | 6 | 7} {slot/port | all}
no port-channel load-balance {slot/port | all}
Parameters
1
2
3
4
5
6
7
slot/port | all
Default
The default is 3.
Command Mode
•
Global Config
•
Interface Config
5-357 port-channel min-links
Configures the port-channel's minimum links for lag interfaces.
port-channel min-links 1-32
Parameters
None
Source: MAC, VLAN, EtherType, and incoming port associated with the
packet.
Destination: MAC, VLAN, EtherType, and incoming port associated with
the packet.
Source/Destination: MAC, VLAN, EtherType, and incoming port
associated with the packet.
Source IP and Source TCP/UDP fields of the packet.
Destination IP and Destination TCP/UDP Port fields of the packet.
Source/Destination IP and source/destination TCP/UDP Port fields of
the packet.
Enhanced hashing mode.
For Global Config Mode only: The interface is defined as a logical
slot/port number of a configured port-channel. All configuration to all
currently configured port-channels.
413