Printing Or Plotting The Analyzer's Display; To Print Analyzer Display; Printer Preparation; Execute Print - Agilent Technologies 4396B Gpib Programming Manual

6

Printing or Plotting the Analyzer's Display

This chapter describes how to print the information on the analyzer display using GPIB
commands.

To Print Analyzer Display

Printer Preparation

1. Connect a printer using a parallel cable.
2. Turn the printer on.

Execute Print

To print the screen, execute the folowing command.
Set the GPIB address when you execute from an external controller.

To Observe Printing

The Basic program shown below gives an example to detect printing end by using a SRQ
interrupt.
Printing or Plotting the Analyzer's Display 6-1