Printing, Plotting, and Saving Measurement Results
Plotting Multiple Measurements Per Page Using a Pen Plotter
Plotting Multiple Measurements Per Page Using a Pen Plotter
1. Configure and define the plot, as explained in
Plot Function" on page
2. Press
SEL QUAD [ ]
Copy
3. Choose the quadrant where you want your displayed measurement to appear on the hardcopy. The
following quadrants are available:
❏
LEFT UPPER
❏
LEFT LOWER
❏
RIGHT UPPER
❏
RIGHT LOWER
The selected quadrant will appear in the brackets under
Figure 4-8 Plot Quadrants
4. Press
.
PLOT
5. Make the next measurement that you want to see on your hardcopy.
6. Press
and choose another quadrant where you want to place the displayed measurement.
Copy
7. Repeat the previous three steps until you have captured the results of up to four measurements.
4-18
"Configuring a Plot Function" on page 4-9
4-13.
.
.
SEL QUAD [ ]
and
"Defining a