If Y ou Have a Problem
This chapter provides the information you need to correct the listed problems.
If There Is No Response From an Instrument on the GPIB Bus
Check all GPIB addresses and cable connections.
Most GPIB problems are caused by an incorrect address or a bad or loose GPIB cable.
If an Error Message is Displayed
Check the error message on the analyzer's display.
If \
1. Get the error number and description using the
on how to use this command, see the \To Report Command Error Occurrence" in
Chapter 3.)
2. See \Messages" in the
If any other message is displayed:
See \Messages" in the
" is displayed:
GPIB Command Reference
GPIB Command Reference
command. (For information
manual.
manual.
If Y ou Have a Problem
12
12-1