Table of Contents
Advertisement
Configuration | Loop Protection
Item
Role
Timeout
Prio
Configuration | Loop Protection
Use this page to review the current Loop Protection settings and if necessary, change them.
110 - Configuration Pages
Aggregation | LACP (Continued)
The Role shows the LACP activity status. The Active transmits LACP
packets each second, while Passive waits for a LACP packet from a partner
(speak if spoken to).
The Timeout controls the period between BPDU transmissions. Fast
transmits LACP packets each second, while Slow waits for 30 seconds
before sending a LACP packet.
The Prio controls the priority of the port. If the LACP partner wants to
form a larger group than is supported by this device then this parameter
controls which ports are active and which ports are in a backup role. The
lower number, the greater the priority.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
