Table of Contents
Advertisement
System | Log
System | Log
Use this page to configure the system log.
Item
Server Mode
Server Address
Syslog Level
44 - Configuration Pages
Configuration | System | Log
Indicates the server mode operation. When the mode operation is enabled,
the syslog message sends out to the syslog server. The syslog protocol is
based on UDP communications and received on UDP port 514 and the
syslog server does not send acknowledgments back to the sender since
UDP is a connectionless protocol and it does not provide
acknowledgments. The syslog packet always sends out even if the syslog
server does not exist. Possible modes are:
•
Enabled: Enable server mode operation.
•
Disabled: Disable server mode operation.
Indicates the IPv4 host address of the syslog server. If the switch supports
DNS, it also can be a host name.
Indicates what kind of message is sent to the syslog server. Possible modes
are:
•
Info: Send informations, warnings and errors.
•
Warning: Send warnings and errors.
•
Error: Send errors.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
