Dhcp | Server | Excluded Ip - Comtrol RocketLinx MP1204-XT User Manual

Industrial poe managed switch 8 - gigabit copper ports 4 - gigabit sfp ports
Table of Contents

Advertisement

DHCP | Server | Excluded IP

Item
Indicates the operation mode per VLAN. Possible modes are:
Mode
Enabled: Enable DHCP server per VLAN.
Disabled: Disable DHCP server per VLAN.
Click to add a new VLAN range.
DHCP | Server | Excluded IP
This page configures excluded IP addresses. The DHCP server does not allocate these excluded IP addresses
to DHCP client.
Item
IP Range
50 - Configuration Pages
Configuration | DHCP | Server | Mode (Continued)
Configuration | DHCP | Server | Excluded IP
Define the IP range to be excluded IP addresses. The first excluded IP
must be smaller than or equal to the second excluded IP. BUT, if the IP
range contains only one excluded IP, then you can just input it to
either one of the first and second excluded IP or both.
Click to add a new excluded IP address range.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A

Advertisement

Table of Contents
loading

Table of Contents