Qos | Qos Control List - Comtrol RocketLinx MP1204-XT User Manual

QoS | QoS Control List

QoS | QoS Control List
This page shows the QoS Control List (QCL), which is made up of the QCEs. Each row describes a QCE that is
defined. The maximum number of QCEs is 256 on each switch.
Click the lowest plus sign to add a new QCE to the list.
Item
QCE Indicates the QCE id.
Port Indicates the list of ports configured with the QCE.
Indicates the destination MAC address. Possible values are:
•
•
DMAC
•
•
The default value is Any.
Match specific source MAC address or Any.
SMAC
If a port is configured to match on DMAC/DIP, this field indicates the DMAC.
Indicates tag type. Possible values are:
•
Tag Type •
•
The default value is Any.
Indicates (VLAN ID), either a specific VID or range of VIDs. VID can be in the range 1-
VID
4095 or Any
Priority Code Point: Valid values of PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or range(0-1, 2-
PCP
3, 4-5, 6-7, 0-3, 4-7) or Any.
DEI Drop Eligible Indicator: Valid value of DEI are 0, 1 or Any.
166 - Configuration Pages
Configuration | QoS | QoS Control List
Any: Match any DMAC.
Unicast: Match unicast DMAC.
Multicast: Match multicast DMAC.
Broadcast: Match broadcast DMAC.
Any: Match tagged and untagged frames.
Untagged: Match untagged frames.
Tagged: Match tagged frames.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A