Table of Contents
Advertisement
LLDP | PoE
This page provides a status overview for all LLDP PoE neighbors. The displayed table contains a row for each
interface on which an LLDP PoE neighbor is detected.
Item
Local Interface
Power Type
Power Source
Power Priority
Maximum Power
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
The interface for this switch on which the LLDP frame was received. .
The Power Type represents whether the device is a Power Sourcing Entity (PSE)
or Power Device (PD). If the Power Type is unknown it is represented as Reserved
The Power Source represents the power source being utilized by a PSE or PD
device.
If the device is a PSE device it can either run on its Primary Power Source or its
Backup Power Source. If it is unknown whether the PSE device is using its
Primary Power Source or its Backup Power Source it is indicated as Unknown.
If the device is a PD device it can either run on its local power supply or it can use
the PSE as power source. It can also use both its local power supply and the PSE.
If it is unknown what power supply the PD device is using it is indicated as
Unknown.
Power Priority represents the priority of the PD device, or the power priority
associated with the PSE type device's interface that is sourcing the power. There
are three levels of power priority. The three levels are: Critical, High and Low.
If the power priority is unknown it is indicated as Unknown.
The Maximum Power Value contains a numerical value that indicates the
maximum power in watts required by a PD device from a PSE device, or the
minimum power a PSE device is capable of sourcing over a maximum length
cable based on its current configuration.
The maximum allowed value is 102.3 W. If the device indicates value higher than
102.3 W, it is represented as reserved.
Monitor | LLDP | PoE
LLDP | PoE
Monitor Pages - 241
Advertisement
Table of Contents
