Table of Contents
Advertisement
Configuration Using the Web Interface
Loop Protection
Loop protection prevents broadcast loops in Layer 2 switching configurations.
Loop Protection Page
Transmit Interval
Port
Loop Protection
Status
Apply
Enable/Disable All
Reload
88 - Loop Protection
Loop protection mechanism detection packet transmitting interval
1 ~ 10 seconds (default is 1).
The port ID.
Enable/Disable loop protection mechanism on port.
The status of loop protection.
Click Apply to apply the settings.
Note: You must Save the settings
maintain these settings if the ES8508 is powered off.
Click the Enable/Disable All button to enable or disable all ports
and then click Apply button to apply.
Click the Reload button to reload loop protection information.
(Page
129), if you want to
RocketLinx ES8508 Series User Guide: 2000575 Rev. A
Advertisement
Table of Contents
