Table of Contents
Advertisement
IPMC | MLD Snooping | IPv6 SFM Information
Each page shows up to 99 entries from the MLD SFM Information table, default being 20, selected through
the entries per page input field. When first visited, the page showsthe first 20 entries from the beginning of the
MLD SFM Information Table.
The Start from VLAN, and group input fields allows you to select the starting point in the MLD SFM
Information Table. Clicking the Refresh button updates the displayed table starting from that or the closest
next MLD SFM Information Table match. In addition, the two input fields will - upon a Refresh button click -
assume the value of the first displayed entry, allowing for continuous refresh with the same start address.
The
uses the last entry of the currently displayed table as a basis for the next lookup.
When the end is reached the text No more entries is shown in the displayed table. Use the
start over.
Item
VLAN ID
Group
Port
Mode
Source Address
Type
Hardware
Filter/Switch
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Monitor | IPMC | MLD Snooping | Groups Information
VLAN ID of the group.
Group address of the group displayed.
Switch port number.
Indicates the filtering mode maintained per (VLAN ID, port number,
Group Address) basis. It can be either Include or Exclude.
IP Address of the source. Currently, system limits the total number of
IP source addresses for filtering to be 128.
Indicates the Type. It can be either Allow or Deny.
Indicates whether data plane destined to the specific group address
from the source IPv6 address could be handled by chip or not.
IPMC | MLD Snooping | IPv6 SFM Information
button to
Monitor Pages - 235
Advertisement
Table of Contents
