Comtrol ROCKETLINX ES8509-XT User Manual
  1. Manuals
  2. Brands
  3. Comtrol Manuals
  4. Switch
  5. ROCKETLINX ES8509-XT
  6. User manual

Comtrol ROCKETLINX ES8509-XT User Manual

Industrial managed switch
Hide thumbs Also See for ROCKETLINX ES8509-XT:
Table of Contents

Advertisement

Quick Links

Download this manual
Industrial Managed Switch
4 - Gigabit Ports
5 - Gigabit RJ45/SFP Combo Ports
User Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ROCKETLINX ES8509-XT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Comtrol ROCKETLINX ES8509-XT

Summary of Contents for Comtrol ROCKETLINX ES8509-XT

  • Page 1 Industrial Managed Switch 4 - Gigabit Ports 5 - Gigabit RJ45/SFP Combo Ports User Guide...

  • Page 2: Copyright Notice

    All Rights Reserved. Comtrol Corporation makes no representations or warranties with regard to the contents of this document or to the suitability of the Comtrol product for any particular purpose. Specifications are subject to change without notice. Some software or features may not be available at the time of publication.

  • Page 3: Table Of Contents

    Backup the Configuration - Local File Method ................60 Restore the Configuration - Local Method..................60 Backup the Configuration - TFTP Server Method ................61 Restore the Configuration - TFTP Server Method ................62 Table of Contents RocketLinx ES8509-XT User Guide: 2000557 Rev. D - 3...
  • Page 4 802.1x Configuration ..........................109 802.1x Port Configuration ........................111 802.1x Port Information ......................... 113 Warning................................ 114 Fault Relay.............................. 114 Event Selection ............................116 SysLog Configuration ..........................117 SMTP Configuration..........................118 4 - RocketLinx ES8509-XT User Guide: 2000557 Rev. D Table of Contents...
  • Page 5 Overview..............................199 Modbus TCP/IP Function Codes ......................200 Error Checking ............................200 Exception Response ..........................201 Modbus TCP Register Table........................201 CLI Commands for Modbus TCP/IP ...................... 208 Table of Contents RocketLinx ES8509-XT User Guide: 2000557 Rev. D - 5...
  • Page 6 Table of Contents Technical Support ...........................209 Comtrol SFP Modules ..........................209 Comtrol Private MIB..........................209 Comtrol Support ............................209 6 - RocketLinx ES8509-XT User Guide: 2000557 Rev. D Table of Contents...

  • Page 7: Introduction

    Coupling and Rapid Dual Homing technology. Ring Coupling and Rapid Dual Homing technology means that an Ethernet Ring can be extended more easily whether with Comtrol switches or other managed switches. Event warnings can be sent to the network administrator by email or system log and to field engineers by relay output.
  • Page 8 Introduction 8 - Introduction RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 9: Hardware Installation

    Hardware Installation You can use the following subsections to install the RocketLinx ES8509-XT. • Connect the Power and Ground • Connect the Digital Input and Relay Output on Page 10 • Mount the ES8509-XT on Page 11 • Connect the Ethernet Ports on Page 13 •...

  • Page 10: Connect The Digital Input And Relay Output

    0 to 10VDC and logic high is 11 to 30VDC. Do not apply a higher voltage than the specification; it may cause internal circuit damage or a cause an incorrect DI action. 10 - Connect the Digital Input and Relay Output RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 11: Mount The Es8509-Xt

    3. Lightly push the bottom of DIN rail clip into the track. 4. Verify that the DIN rail clip is tightly attached on the track. 5. To remove the ES8509-XT from the track, reverse the steps above. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Mount the ES8509-XT - 11...
  • Page 12 4. Use the hook holes at the corners of the wall mounting plate to hang the ES8509-XT onto the wall. 5. To remove the wall mounting plate, reverse the steps above. 12 - Mount the ES8509-XT RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 13: Connect The Ethernet Ports

    (for example, switch, hub, or workstation) are less than 100 meters (328 feet) and meet these requirements. • 10/100BASE-TX: Category, 5 cable • 1000BASE-TX: Category 5 or 5e cable RocketLinx ES8509-XT User Guide: 2000557 Rev. D Connect the Ethernet Ports - 13...

  • Page 14: Connect Sfp Transceivers (Combo Ports 1-5)

    Ring (Ring Master) Green: Working as a ring Green: Ring with wrong port Ring function not master Amber: Device’s ring port enabled Amber: Ring abnormal failed 14 - Connect SFP Transceivers (Combo Ports 1-5) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 15: Panel Layout

    (Gigabit/SFP) 1000 LED Power 1/2 LEDs SFP Ports SYS LED 100BASE-FX 1000BASE-SX/LX RS-232 Console Port Reset Ports 6-9 10/100/1000BASE-TX Link/Activity LED Speed LED Ground Screw PW1/PW2 DI and DO RocketLinx ES8509-XT User Guide: 2000557 Rev. D Panel Layout - 15...

  • Page 16: Reset Button

    This loads the factory default configuration values into the Seconds ES8509-XT including the IP address. The Reset button is located on the front panel of the ES8509-XT below the Console port. 16 - Reset Button RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 17: Using Portvision Dx

    • IO-Link Master family In addition to identifying Comtrol Ethernet attached products, you can use PortVision DX to display any third-party switch and hardware that may be connected directly to those devices. All non-Comtrol products and unmanaged RocketLinx switches are treated as non-intelligent devices and have limited feature support.

  • Page 18: Portvision Dx Requirements

    Windows 10 operating systems (at the time of publication). PortVision DX requires that you connect the Comtrol Ethernet attached product to the same network segment as the Windows host system if you want to be able to scan and locate it automatically during the configuration process.

  • Page 19: Configuring The Network Settings

    1. If necessary, start PortVision DX using the PortVision DX desktop shortcut or from the Start button, click All Programs > Comtrol > PortVision DX > PortVision DX. Note: Depending on your operating system, you may need to click Yes to the Do you want to allow the following program to make changes to this computer? query.
  • Page 20 3. Select the Comtrol Ethernet attached products that you want to locate and then click Scan. Note: If the Comtrol Ethernet attached product is not on the local segment and it has been programmed with an IP address, it will be necessary to manually add the Comtrol Ethernet attached product to PortVision DX.
  • Page 21 Page 129 • Right-click the ES8509-XT in the Device List pane and click Webpage in the popup menu. Note: The default User Name and Password are both admin. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Configuring the Network Settings - 21...

  • Page 22: Checking The Firmware Version

    Checking the Firmware Version Checking your web interface and bootloader versions is easy in PortVision DX. Comtrol recommends loading the latest firmware and bootloader so that you have all of the latest feature enhancements and bug fixes. 1. If the ES8509-XT is not displayed in PortVision DX, click the Scan button.

  • Page 23: Uploading The Latest Firmware Or Bootloader

    Toolbar and that refreshes all devices in PortVision DX. 7. Verify that the version change is reflected in under the Software Version. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Uploading the Latest Firmware or Bootloader - 23...

  • Page 24: Uploading Firmware To Multiple Es8509-Xt Switches

    1. If the ES8509-XT is not displayed in PortVision DX, click the Scan button. 2. Select the Comtrol Ethernet attached product type and click the Scan button. 3. Shift-click the multiple ES8509-XT switches on the Main screen that you want to update and right-click and then click Advanced >...

  • Page 25: Adding A New Device In Portvision Dx

    4. Enter a friendly device name in the Device Name list box. 5. Optionally, enter the serial number in the Serial Number list box. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Adding a New Device in PortVision DX - 25...

  • Page 26: Using Configuration Files

    2. Click Yes to the warning that it will take 25 seconds per device and it may also reboot the devices. 3. Browse to the location of the configuration file, click the file name (.dc) and then Open. 4. Close the Load Configuration popup message. 26 - Using Configuration Files RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 27: Using The Led Tracker

    The ES8509-XT SYS LED will flash for five seconds. 2. If necessary, you may need to click Tracker and ON several times to catch the flashing SYS LED. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Using the LED Tracker - 27...

  • Page 28: Customizing Portvision Dx

    The following illustrates how you can customize your view. See the PortVision DX Help system for detailed information about modifying the view. For example, the above screen shot illustrates devices layered in folders. 28 - Customizing PortVision DX RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 29: Accessing Rocketlinx Documentation From Portvision Dx

    Note: It may take a few minutes to download, depending on your connection speed. The document opens automatically after it has downloaded. 7. Click Close if you have downloaded all of the documents that you wanted. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Accessing RocketLinx Documentation from PortVision DX - 29...

  • Page 30: How To Open Previously Downloaded Documents

    How to Open Previously Downloaded Documents Use the following procedure to access previously downloaded documents in PortVision DX. Note: Optionally, you can browse to the Program Files (x86) > Comtrol > PortVision DX > Docs subdirectory and open the document.

  • Page 31: Configuration Using The Web User Interface

    Monitor and Diag on Page 119 • Device Front Panel on Page 126 • Save to Flash on Page 127 • Logout on Page 127 RocketLinx ES8509-XT User Guide: 2000557 Rev. D Configuration Using the Web User Interface - 31...

  • Page 32: Web User Interface

    3. Enter the user name, the password, and click OK. The default user name and password are both admin. The Welcome page of the web interface then appears. 32 - Web User Interface RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 33: Secure Web User Interface

    3. Click Continue to the web site (not recommended). 4. Enter the user name and the password and click OK. The default user name and password are both admin. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Secure Web User Interface - 33...
  • Page 34 To use static addressing, enter a valid IP address, subnet mask and default gateway. To use DHCP, click Enable in the DHCP Client drop list. Click Apply. 34 - Secure Web User Interface RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 35: Feature Overview

    Server Port) on Page 45 • Secondary RADIUS Server (RADIUS Server IP, Shared Key, and Server Port) Backup and Backup and Restore Local or TFTP Restore on Page 56 RocketLinx ES8509-XT User Guide: 2000557 Rev. D Feature Overview - 35...
  • Page 36 Dry Output - On Period (Sec) and Off Period (Sec) • DI - State (High or Low) • Enable/Disable GMRP Multicast Filtering Configuration on Page 102 • Port by Port Basis 36 - Feature Overview RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 37 New MST Instance - Instance ID, VLAN Group, and MSTP Configuration Configuration Instance Priority Page 78 • Current MST Instance Configuration - Instance ID, VLAN Group, and Instance Priority RocketLinx ES8509-XT User Guide: 2000557 Rev. D Feature Overview - 37...
  • Page 38 Port Security State - Port by Port Port Security Port Security • Add Port Security Entry - Port, VID, and MAC Address Page 109 • Port Security Entry List - Port VID, and MAC Address 38 - Feature Overview RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 39 Port Configuration • PVLAN Port Type - Normal, Host, or Promiscuous PVLAN Port • VLAN ID PVLAN Port Configuration Configuration PVLAN Association Page 97 • Secondary VLAN • Primary VLAN RocketLinx ES8509-XT User Guide: 2000557 Rev. D Feature Overview - 39...
  • Page 40 Page 65 • V1/V2c Community SNMP SNMP Configuration Configuration • Public - Read Only or Read and Write Page 106 • Private - Read Only or Read and Write 40 - Feature Overview RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 41 - Edge Port - Aggregated (D/Type) Port by Port • STP State STP Port • Path Cost STP Port Configuration Configuration • Priority Page 75 • Link Type • Edge Port RocketLinx ES8509-XT User Guide: 2000557 Rev. D Feature Overview - 41...
  • Page 42 VLAN Port Configuration Configuration • Accept Frame Type Page 90 • Ingress Filtering • VLAN ID • Name VLAN Table VLAN Table Page 95 • Status • Port by Port 42 - Feature Overview RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 43 Email Alert - Enable/Disable • SMTP Server IP • Mail Account SMTP Warning - SMTP Configuration • Authentication Configuration Page 122 • User Name • Password • Recipient Email Address 1-4 RocketLinx ES8509-XT User Guide: 2000557 Rev. D Feature Overview - 43...
  • Page 44 Configuration Using the Web User Interface 44 - Feature Overview RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 45: Basic Settings

    You can assign a name to the ES8509-XT with up to 64 characters. After you System Name configure the name, the CLI system selects the first 12 characters as the name in CLI system. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Basic Settings - 45...

  • Page 46: Admin Password

    You can change the user name and the password here to enhance security. Admin Password Page Administrator Name You can enter a new user name here. The default name is admin. 46 - Admin Password RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 47 UDP port of RADIUS server. Click Apply to apply the settings. Apply Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Admin Password - 47...

  • Page 48: Ip Configuration

    Configuration Using the Web Interface IP Configuration This web page allows you to configure the ES8509-XT’s IP address settings. 48 - IP Configuration RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 49 Click the Reload button to reload IPv6 configuration. Click Apply to apply the settings. Apply Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. RocketLinx ES8509-XT User Guide: 2000557 Rev. D IP Configuration - 49...

  • Page 50: Time Setting

    Select Enable if you want to use PTP (Precision Time Protocol). PTP State The IEEE 1588 PTP (Precision Time Protocol) supports very precise time synchronization in an Ethernet network. 50 - Time Setting RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 51 PTP server. Click Apply to apply the settings. Apply Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Time Setting - 51...
  • Page 52 (GMT+03:00) Moscow, St. Petersburg, Volgograd (GMT+03:00) Nairobi (GMT+03:30) Tehran (GMT+04:00) Abu Dhabi, Muscat (GMT+04:00) Baku, Tbilisi, Yerevan (GMT+04:30) Kabul (GMT+05:00) Ekaterinburg (GMT+05:00) Islamabad, Karachi, Tashkent (GMT+05:30) Calcutta, Chennai, Mumbai, New Delhi 52 - Time Setting RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 53 (GMT+10:00) Brisbane (GMT+10:00) Canberra, Melbourne, Sydney (GMT+10:00) Guam, Port Moresby (GMT+10:00) Hobart (GMT+10:00) Vladivostok (GMT+11:00) Magadan, Solomon Is., New Caledonia (GMT+12:00) Auckland, Wellington (GMT+12:00) Fiji, Kamchatka, Marshall Is. (GMT+13:00) Nuku'alofa RocketLinx ES8509-XT User Guide: 2000557 Rev. D Time Setting - 53...

  • Page 54: Dhcp Server Configuration

    Configuration Using the Web Interface DHCP Server Configuration Use this page to configure DHCP server services. 54 - DHCP Server Configuration RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 55 Remove. Note: By default, only the table heading are displayed until information is entered in the IP Address and MAC Address fields and added using the Add button. RocketLinx ES8509-XT User Guide: 2000557 Rev. D DHCP Server Configuration - 55...

  • Page 56: Dhcp Leased Entries

    The lease time of the leased entry (in seconds). Reload Click to reload DHCP leased entries. Note: By default, only the table heading are displayed until there is data to display. 56 - DHCP Leased Entries RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 57: Dhcp Option82 Relay Information

    Relay policy keep Keeps the original option 82 field and forwards to server. Relay policy drop Drops the option 82 field and do not add any option 82 field. RocketLinx ES8509-XT User Guide: 2000557 Rev. D DHCP Option82 Relay Information - 57...
  • Page 58 IP Address: IP Address of the switch. Remote-ID Remote ID: The Remote-ID carries information relating to the remote host end of the circuit, which is the MAC address of the relay. 58 - DHCP Option82 Relay Information RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 59: Backup And Restore

    After you save the running-config to flash, the new settings are kept and work after the power is cycled. Use the show startup-config to view it in the CLI. The Backup command can only backup the configuration file to your PC or TFTP server. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Backup and Restore - 59...

  • Page 60: Backup The Configuration - Local File Method

    3. Browse to the location that you want to store the backup configuration file, optionally enter a file name, and click Save. The default configuration file name is the RocketLinx ES8509-XT with a dash, followed by the MAC address of the ES8509-XT.

  • Page 61: Backup The Configuration - Tftp Server Method

    7. Open the Reboot page and click Yes. You are returned to the log in page. Backup the Configuration - TFTP Server Method If you do not have a TFTP server, you can download one from Comtrol using the Start the TFTP Server subsection.

  • Page 62: Restore The Configuration - Tftp Server Method

    4. Select Load from the Load/Save Settings drop list. 5. Click the Submit button. 6. Click Ok to The settings were successfully changed message. 7. Open the Reboot page. 62 - Restore the Configuration - TFTP Server Method RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 63: Firmware Upgrade

    Configuration Using the Web Interface Firmware Upgrade Use this section to update the ES8509-XT with the latest firmware. Comtrol provides the latest firmware on the Comtrol download site. Updated firmware may include new features, bug fixes, or other software changes.

  • Page 64: Upgrading Firmware (Tftp Server)

    The system displays a popup message window after finishing. The default settings work after rebooting the ES8509-XT. 2. Click OK in the popup message to reset the configuration to the defaults. 64 - Upgrading Firmware (TFTP Server) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 65: System Reboot

    Note: Before rebooting, remember to click Save to save your settings. Otherwise, the settings you are lost when the ES8509-XT is powered off. Click the Yes button to reboot your ES8509-XT. RocketLinx ES8509-XT User Guide: 2000557 Rev. D System Reboot - 65...

  • Page 66: Port Configuration

    Note: If both ends are not at the same speed, they cannot link with each other. If both ends are not in the same duplex mode, they are connected by half-duplex mode. 66 - Port Configuration RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 67 Click this field if you want to enter a port description. Click Apply to apply the settings. Apply Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Port Control - 67...

  • Page 68: Port Status

    Note: Most of the SFP transceivers provide vendor information that allows the ES8509-XT to read it. The web interface can display vendor name, wave length, and distance of all Comtrol SFP transceiver models. If you see Unknown info, it may mean that the vendor does not provide their information or that the information of their transceiver cannot be read.
  • Page 69 Configuration Using the Web Interface RocketLinx ES8509-XT User Guide: 2000557 Rev. D Port Status - 69...

  • Page 70: Rate Control

    Unicast, Multicast and Broadcast packets. Click Apply to apply the settings. Apply Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. 70 - Rate Control RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 71: Port Trunking

    The Port Trunking feature is usually used when you need higher bandwidth for the network backbone. This is an inexpensive way for you to transfer more data. The aggregated ports can interconnect to the another switch that also supports Port Trunking. Comtrol supports two types of port trunking: •...

  • Page 72: Aggregation Information

    When LACP is enabled, member ports of LACP group that are not Link Down Ports linked up are displayed in the Link Down column. Reload Click Reload to reload aggregation settings. 72 - Aggregation Information RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 73: Network Redundancy

    Redundant Ring Information on Page 85 • Loop Protection on Page 86 Optionally, you can use the CLI to configure these features, see Network Redundancy (CLI) on Page 152. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Network Redundancy - 73...

  • Page 74: Stp Configuration

    ES8509-XT is powered off. Note: 2*(Forward Delay Time-1) should be greater than or equal to the Max Age. The Max Age should be greater than or equal to 2*(Hello Time + 1). 74 - STP Configuration RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 75: Stp Port Configuration

    Click Apply to apply the settings. Apply Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. RocketLinx ES8509-XT User Guide: 2000557 Rev. D STP Port Configuration - 75...

  • Page 76: Stp Information

    The number of seconds between the transmissions of Spanning-Tree Protocol Hello Time configuration messages. The number of seconds a port waits before changing from its Spanning-Tree Forward Delay Protocol learning and listening states to the forwarding state. 76 - STP Information RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 77 This is the aggregated port information. The ID is the aggregation ID (Trunk ID) Type) and the Type is either Static or LACP. Reload Click the Reload button to reload STP information. RocketLinx ES8509-XT User Guide: 2000557 Rev. D STP Information - 77...

  • Page 78: Mstp Configuration

    CST acts as a single bridge. This is the MSTP Configuration page. MSTP Configuration Page MST Region Configuration Region Name A name used to identify the MST Region. Maximum length: 32 characters. 78 - MSTP Configuration RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 79 Click the Apply button to apply the current MST instance configuration. Apply Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. RocketLinx ES8509-XT User Guide: 2000557 Rev. D MSTP Configuration - 79...

  • Page 80: Mstp Port Configuration

    Click the Apply button to apply the configuration. Apply Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. 80 - MSTP Port Configuration RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 81: Mstp Information

    Configuration Using the Web Interface MSTP Information This page allows you to see the current MSTP information. Choose the Instance ID first. If the instance is not added, the information remains blank. RocketLinx ES8509-XT User Guide: 2000557 Rev. D MSTP Information - 81...
  • Page 82 2*Hello Time seconds. When the bridge device connects an edge port, this port is a non-edge port automatic. Reload Click the Reload button to reload MSTP instance information. 82 - MSTP Information RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 83: Redundant Ring

    Ring Master or not. When configuring Rapid Super Rings, two ports should be selected Ring Port1 to be Ring ports. For a Ring Master, one of the Ring Ports becomes the forwarding port and the other one becomes the blocking port. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Redundant Ring - 83...
  • Page 84 To Enable/Disable the Ring, remember to enable the Ring after you add it. Click Apply to apply the settings. Apply Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. 84 - Redundant Ring RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 85: Redundant Ring Information

    RM or from RM to nonRM. Ring State Transition Shows how many times the Ring status has been transformed between Normal Count and Abnormal state. Reload Click to reload redundant ring information. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Redundant Ring Information - 85...

  • Page 86: Loop Protection

    Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. Reload Click the Reload button to reload loop protection information. 86 - Loop Protection RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 87: Vlan

    • VLAN Configuration on Page 88 • VLAN Configuration on Page 88 • VLAN Information on Page 91 • Private VLAN on Page 92 • PVLAN Configuration on Page 92 RocketLinx ES8509-XT User Guide: 2000557 Rev. D VLAN - 87...

  • Page 88: Vlan Configuration

    VLAN; otherwise the administrator cannot access the switch through the network. The ES8509-XT supports a maximum of 256 VLANs. 88 - VLAN Configuration RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 89 1. Assign Egress rule of the ports to U or T. 2. Press Apply to apply the setting. If you want to remove one VLAN, select the VLAN entry and then click the Remove button. RocketLinx ES8509-XT User Guide: 2000557 Rev. D VLAN Configuration - 89...

  • Page 90: Vlan Port Configuration

    Tag Only mode means that the port can only accept tagged packets.When you select Tag Only the ES8509-XT discards untagged frames or Priority-Tagged only frames received on this port. 90 - VLAN Port Configuration RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 91: Vlan Information

    Port of a VLAN Bridge. Devices that are connected to an Access Link sends and receives frames without IEEE 802.1Q tagging, which is the identification of the VLAN it belongs to. RocketLinx ES8509-XT User Guide: 2000557 Rev. D VLAN Information - 91...

  • Page 92: Private Vlan

    VLANs or can be grouped in the same Community VLAN. The ports within the same community VLAN can communicate with each other. However, the isolated VLAN ports cannot. 92 - Private VLAN RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 93: Pvlan Port Configuration

    Private VLAN Association Secondary After the isolated and community VLANs are configured in the Private VLAN VLAN Configuration page, the VLANs belonging to the second VLAN are displayed. RocketLinx ES8509-XT User Guide: 2000557 Rev. D PVLAN Port Configuration - 93...

  • Page 94: Pvlan Information

    Note: Before configuring PVLAN port type, the private VLAN Association should be done first. PVLAN Information The PVLAN Information page allows you to see the private VLAN information. Click Reload to refresh the page contents. 94 - PVLAN Information RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 95: Gvrp Configuration

    The timer is required on a per-port, per-GARP participant basis. Click Apply to apply the settings. Apply Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. RocketLinx ES8509-XT User Guide: 2000557 Rev. D GVRP Configuration - 95...

  • Page 96: Traffic Prioritization

    Page 99 Optionally, you can use the CLI for configuration, see Traffic Prioritization (CLI) on Page 168. QoS Setting Use this subsection to set up QoS settings for the ES8509-XT. 96 - Traffic Prioritization RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 97 Queue Mapping rule. Click Apply to apply the settings. Apply Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. RocketLinx ES8509-XT User Guide: 2000557 Rev. D QoS Setting - 97...

  • Page 98: Cos-Queue Mapping

    After configuration, press Apply to enable the settings. Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. 98 - CoS-Queue Mapping RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 99: Dscp-Queue Mapping

    After configuration, press Apply to enable the settings. Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. RocketLinx ES8509-XT User Guide: 2000557 Rev. D DSCP-Queue Mapping - 99...

  • Page 100: Multicast Filtering

    Page 101 • IGMP Snooping on Page 102 • GMRP Configuration on Page 103 Optionally, you can use the CLI for configuration, see Multicast Filtering (CLI) on Page 171. 100 - Multicast Filtering RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 101: Igmp Query

    LAN. Enter a number between 1 and 25. Apply Click Apply to apply the settings. Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. RocketLinx ES8509-XT User Guide: 2000557 Rev. D IGMP Query - 101...

  • Page 102: Igmp Snooping

    Click Reload to refresh the table. Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. 102 - IGMP Snooping RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 103: Gmrp Configuration

    Apply Click Apply to apply the settings. Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. RocketLinx ES8509-XT User Guide: 2000557 Rev. D GMRP Configuration - 103...

  • Page 104: Snmp

    Note: When you first install the device in your network, we recommend that you change the community string. Most SNMP management applications use public and private as the default community name, this could be a network security leak. 104 - SNMP RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 105: Snmp V3 Profile

    Click Reload to reload SNMP v3 user information. Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. RocketLinx ES8509-XT User Guide: 2000557 Rev. D SNMP V3 Profile- 105...

  • Page 106: Snmp Traps

    Click Remove to remove selected SNMP server. Click the Reload button to reload SNMP server Reload information. You can see the change of the SNMP predefined standard traps and Comtrol pre-defined traps. The pre- defined traps can be found on the Comtrol ftp site.

  • Page 107: Security

    100 Port Security MAC addresses. Adds a port security entry. Show Port This table shows you enabled port security entries. Security List Remove Removes the selected port security entry. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Security - 107...

  • Page 108: Ip Security

    The maximum security IP is 10. Security IP List This table shows you added the security IP addresses. Remove Click Remove to delete a highlighted entry. Reload To reload the table. 108 - IP Security RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 109: Configuration

    The IP address of the RADIUS server. The password used to communicate between the ES8509-XT and the RADIUS Shared Key Server. Server Port The UDP port of the RADIUS server. RocketLinx ES8509-XT User Guide: 2000557 Rev. D 802.1x Configuration - 109...
  • Page 110 User name: The user name of the local RADIUS user. Local RADIUS User List • Password: The password of the local RADIUS user. • VID: The VLAN ID (VID) of the local RADIUS user. 110 - 802.1x Configuration RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 111: Port Configuration

    After configuring the RADIUS Server or Local RADIUS User List, you also need to configure the authentication mode, authentication behavior, applied VLAN for each port, and permitted communications. RocketLinx ES8509-XT User Guide: 2000557 Rev. D 802.1x Port Configuration - 111...
  • Page 112 Click Apply to apply the settings. Apply Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. 112 - 802.1x Port Configuration RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 113: Port Information

    802.1x Port Information Use the 802.1x Port Information page to observe the port status for Port Control Status, Authorize Status, Authorized Supplicant, and Oper Control Direction for each port. RocketLinx ES8509-XT User Guide: 2000557 Rev. D 802.1x Port Information - 113...

  • Page 114: Warning

    Monitors port link down events for the selected ports. Ring Monitors ring topology changes. Ping If the target IP address does not reply to the ping request, the fault relay is enabled. 114 - Warning RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 115 Relay triggered when DI changes state to high or low. Click Apply to apply the settings. Apply Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Fault Relay - 115...

  • Page 116: Event Selection

    The information read from the DDM SFP transceiver is over temperature or out the range of TX/RX power. Port Event Warning is sent when….. Link-Up The port is connected to another device. 116 - Event Selection RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 117: Syslog Configuration

    127), if you want to maintain these settings if the ES8509-XT is powered off. When enabling Local or Both modes, you can monitor the system logs in the Monitor and Diag /Event Log page. RocketLinx ES8509-XT User Guide: 2000557 Rev. D SysLog Configuration - 117...

  • Page 118: Smtp Configuration

    ES8509-XT (maximum 40 characters) Click Apply to apply the settings. Note: You must Save the settings (Page 127), if you want Apply to maintain these settings if the ES8509-XT is powered off. 118 - SMTP Configuration RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 119: Monitor And Diag

    The Time to Live (TTL) timer. The LLDP state expires when the LLDP hold time LLDP is not received by the hold time. The default is 120 seconds. and the range is from 10 to 255. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Monitor and Diag - 119...
  • Page 120 The VLAN ID of the peer device on the same network segment. Click Apply to apply the settings. Apply Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. 120 - LLDP Configuration RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 121: Mac Address Table

    64 minutes. The default Aging Time is 300 seconds. If the value is set to 0, the aging function is disabled and all learned addresses remain in the database forever. RocketLinx ES8509-XT User Guide: 2000557 Rev. D MAC Address Table - 121...
  • Page 122 Click Apply to apply the settings. Apply Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. 122 - MAC Address Table RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 123: Port Statistics

    The count of collision frames, including single, multiple, excessive, Collision and late collisions frames. Clear Selected Click to clear selected port counts. Clear All Click to clear all counts. Reload Click to reload all counts. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Port Statistics - 123...

  • Page 124: Port Mirroring

    LAN analyzer or Netxray device to this port. Click Apply to apply the settings. Apply Note: You must Save the settings (Page 127), if you want to maintain these settings if the ES8509-XT is powered off. 124 - Port Mirroring RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 125: Event Log

    This page provides a Ping Utility to ping a remote device and check whether the device is alive or not. Type the Target IP address of the target device and click Start to start the ping. After few seconds, you can see the result in the Result field. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Event Log - 125...

  • Page 126: Device Front Panel

    Note: There is not a CLI command for this feature. If you can view the physical LEDs, you can use the Descriptions on Page 14, which provide detailed LED information. 126 - Device Front Panel RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 127: Save To Flash

    Click the Logout option in the web user interface to manually logout the web connection. If you have saved your changes, click Yes to logout, No to remain the web user interface. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Save to Flash - 127...
  • Page 128 Configuration Using the Web Interface 128 - Logout RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 129: Configuration Using The Command Line Interface (Cli)

    Page 181 • Saving to Flash (CLI) on Page 184 • Logging Out (CLI) on Page 184 • Service (CLI) on Page 184 RocketLinx ES8509-XT User Guide: 2000557 Rev. D Configuration Using the Command Line Interface (CLI) - 129...

  • Page 130: Using The Serial Console

    Configuration Using the Command Line Interface (CLI) Using the Serial Console Comtrol provides one RS-232 RJ45 console cable with the ES8509-XT. Note: A system COM port is required to use a serial console connection. If you do not have an available COM...
  • Page 131 None Stop Bit Flow Control None 8. Click Session under Category in the menu. 9. Type an appropriate Saved Session name and click Save. 10. Click Open. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Using the Serial Console - 131...
  • Page 132 Switch> enable Switch# configure terminal Switch(config)# int vlan1 Switch(config-if)# ip address 192.168.11.252/16 For more information about using the CLI, see Command Line Interface Introduction on Page 134. 132 - Using the Serial Console RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 133: Using A Telnet/Ssh Console

    2. Start PortVision DX. 3. Right-click the ES8509-XT in the Device List pane (lower) and click Telnet/SSH. 4. Select either Telnet or SSH and leave the default port number. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Using a Telnet/SSH Console - 133...

  • Page 134: Command Line Interface Introduction

    Page 140, which can be used to configure the settings for a specific VLAN Refer to Configuration Using the Command Line Interface (CLI) on Page 129 to access the CLI. 134 - Command Line Interface Introduction RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 135: User Exec Mode

    3. Type show ip ? (with a space between show and the ?, do not press the Enter key) to review the options for Switch> show ip forwarding IP forwarding status route IP routing table RocketLinx ES8509-XT User Guide: 2000557 Rev. D User EXEC Mode - 135...
  • Page 136 A.B.C.D show ip route A.B.C.D/M show ip route supernets-only show version telnet WORD telnet WORD PORT traceroute WORD 136 - Accessing the Options for a Command RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 137: Privileged Exec Mode

    Show running system information telnet Open a telnet connection terminal Set terminal line parameters traceroute Trace route to destination write Write running configuration to memory, network, or terminal RocketLinx ES8509-XT User Guide: 2000557 Rev. D Privileged EXEC Mode - 137...

  • Page 138: Global Configuration Mode

    SMTP server configuration snmp-server SNMP server spanning-tree spanning tree algorithm trunk Trunk group configuration vlan Virtual LAN warning-event Warning event selection write-config Specify config files to write to 138 - Global Configuration Mode RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 139: (Port) Interface Configuration

    Small form-factor pluggable shutdown Shutdown the selected interface spanning-tree spanning-tree protocol speed Specify the speed of a Fast Ethernet port or a Gigabit Ethernet port switchport Set switching mode characteristics RocketLinx ES8509-XT User Guide: 2000557 Rev. D (Port) Interface Configuration - 139...

  • Page 140: (Vlan) Interface Configuration

    IFNAME in global configuration mode. Port Interface Configuration: Configure port related • Exit: Type exit or Ctrl+Z to Global Configuration Switch(config-if)# settings. mode. • Type end to return to Privileged EXEC mode. 140 - (VLAN) Interface Configuration RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 141 To lock the screen of the terminal - you cannot input any command. Ctrl+S Ctrl+Q To unlock the screen which is locked by Ctrl+S. Ctrl+Z To exit Configuration mode. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Command Mode Summary - 141...
  • Page 142 Configuration Using the Command Line Interface (CLI) 142 - Command Mode Summary RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 143: Basic Settings (Cli)

    User Name and Password PASSWORD Administrator account password Switch(config)# administrator admin admin Change administrator account admin and password admin success. Switch# show administrator Administrator account information Display name: admin password: admin RocketLinx ES8509-XT User Guide: 2000557 Rev. D Basic Settings (CLI) - 143...
  • Page 144 Note: By typing clock timezone?, you can see the timezone list. Then choose the number of the timezone you want to select. Switch(config)# ptpd run <cr> IEEE 1588 preferred-clock Preferred Clock slave Run as slave 144 - Basic Settings (CLI) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 145 Switch# configure terminal Switch(config)# router dhcp DHCP Server configuration Switch(config-dhcp)# service dhcp Configure DHCP network address pool Switch(config-dhcp)#network 50.50.50.0/4 -(network/mask) Switch(config-dhcp)#default-router 50.50.50.1 Lease time configure Switch(config-dhcp)#lease 300 (300 sec) RocketLinx ES8509-XT User Guide: 2000557 Rev. D Basic Settings (CLI) - 145...
  • Page 146 -------------- (list IP & MAC binding entry) Leased Address List IP Address MAC Address Leased Time Remains --------------- -------------- -------------------- (list leased Time remain information for each entry) 146 - Basic Settings (CLI) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 147 IP address Switch(config-dhcp)# ip dhcp static 00C0.4E35.0001 192.168.10.99 Switch(config-dhcp)# ip dhcp relay information DHCP Relay – Enable option Option82 DHCP Relay policy Option82 Switch(config-dhcp)# ip dhcp relay information option RocketLinx ES8509-XT User Guide: 2000557 Rev. D Basic Settings (CLI) - 147...
  • Page 148 ..............Firmware Upgrade ........................Firmware upgrade success!! Rebooting..Load Default Switch# reload default-config file Load Default Reload OK! Switch# reboot System Reboot Reboot Switch# reboot 148 - Basic Settings (CLI) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 149: Port Configuration (Cli)

    Switch(config-if)# flowcontrol on Flowcontrol on for port 1 set ok! Port Control – Flow Control Switch(config-if)# flowcontrol off Flowcontrol off for port 1 set ok! RocketLinx ES8509-XT User Guide: 2000557 Rev. D Port Configuration (CLI) - 149...
  • Page 150 Limit Broadcast, Multicast and flooded unicast frames Packet Type multicast Limit Broadcast and Multicast frames Switch(config-if)# rate-limit ingress mode broadcast Set the ingress limit mode broadcast ok. 150 - Port Configuration (CLI) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 151 Switch# show trunk group 1 FLAGS: I -> Individual P -> In channel D -> Port Down Trunk Group Display – Trunk TGID Protocol Ports -----+---------+------------------------------------------------ 1 Static 1(D) 2(D) Switch# RocketLinx ES8509-XT User Guide: 2000557 Rev. D Port Configuration (CLI) - 151...

  • Page 152: Network Redundancy (Cli)

    Switch(config)# spanning-tree priority 4096 Switch(config)# spanning-tree bridge-times (forward Delay) (max-age) (Hello Time) Bridge Times Switch(config)# spanning-tree bridge-times 15 20 2 This command allows you configure all the timing in one time. 152 - Network Redundancy (CLI) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 153 Instance to VLAN (Ex: Switch(config-mst)# instance 1 vlan Mapping VLAN VLANMAP target vlan number(ex.10) or range(ex.1-10) 2 to Instance 1) Switch(config-mst)# instance 1 vlan 2 RocketLinx ES8509-XT User Guide: 2000557 Rev. D Network Redundancy (CLI) - 153...
  • Page 154 Switch(config)# configuration mode Switch(config-mst)# end Apply the setting and go to apply all mst configuration changes the global mode Switch# 154 - Network Redundancy (CLI) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 155 Number from 0 to 240, in multiple of 16 Switch(config-if)# spanning-tree port-priority 128 Link Type - Switch(config-if)# spanning-tree link-type auto Auto Link Type - P2P Switch(config-if)# spanning-tree link-type point-to-point RocketLinx ES8509-XT User Guide: 2000557 Rev. D Network Redundancy (CLI) - 155...
  • Page 156 Summary of connected spanning tree ports : Port-State Summary Blocking Listening Learning Forwarding Disabled -------- --------- -------- ---------- -------- Port Link-Type Summary AutoDetected PointToPoint SharedLink EdgePort ------------ ------------ ---------- -------- 156 - Network Redundancy (CLI) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 157 MST01 Port Role State Cost Prio.Nbr Type ------ ---------- ---------- -------- ---------- ------------------ Designated Forwarding 200000 128.1 P2P Internal(MSTP) Designated Forwarding 200000 128.2 P2P Internal(MSTP) RocketLinx ES8509-XT User Guide: 2000557 Rev. D Network Redundancy (CLI) - 157...
  • Page 158 6352, received 0 Information Instance Role State Cost Prio.Nbr Vlans mapped -------- ---------- ---------- -------- ---------- --------------------- Designated Forwarding 200000 128.1 1,4-4094 Designated Forwarding 200000 128.1 Designated Forwarding 200000 128.1 158 - Network Redundancy (CLI) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 159 Role Transition count 0 Ring State Transition count 1 Ring ID is optional. If the ring ID is typed, this command only displays the information of the target Ring. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Network Redundancy (CLI) - 159...
  • Page 160 Configuration Using the Command Line Interface (CLI) 160 - Network Redundancy (CLI) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 161: Vlan (Cli)

    Port Security : Disabled Auto Negotiation : Enable Loopback Mode : None STP Status: disabled Default CoS Value for untagged packets is 0. Mdix mode is Auto. Medium mode is Copper. RocketLinx ES8509-XT User Guide: 2000557 Rev. D VLAN (CLI) - 161...
  • Page 162 Switch(config-if)# no ip address 192.168.250.8/24 ->Delete the IP address Create multiple Switch(config)# interface vlan 5-8 VLANs (VLAN 5-8) Switch(config)# interface vlan 2 Shutdown VLAN Switch(config-if)# shutdown Switch(config-if)# no shutdown ->Turn on the VLAN 162 - VLAN (CLI) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 163 Management VLAN Switch(config)# int vlan 1 (Go to management VLAN) Management VLAN Switch(config-if)# no shutdown Switch# show running-config …. interface vlan1 Display ip address 192.168.250.17/24 ip igmp no shutdown …. RocketLinx ES8509-XT User Guide: 2000557 Rev. D VLAN (CLI) - 163...

  • Page 164: Private Vlan (Cli)

    Configure the VLAN as an isolated private VLAN primary Configure the VLAN as a primary private VLAN Switch(config-vlan)# private-vlan primary <cr> Primary Type Switch(config-vlan)# private-vlan isolated <cr> Isolated Type Switch(config-vlan)# private-vlan community <cr> Community Type 164 - Private VLAN (CLI) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 165 Switch# show vlan private-vlan FLAGS: I -> Isolated P -> Promiscuous C -> Community Primary Secondary Type Ports Private VLAN ------- --------- ----------------- --------------------- Information Isolated gi1(P),gi2(I) Community gi2(P),gi3(C) Community gi2(P),gi1(C),gi3(I) RocketLinx ES8509-XT User Guide: 2000557 Rev. D Private VLAN (CLI) - 165...
  • Page 166 2 3 Information interface gigabitethernet10 switchport access vlan add 2,5 switchport trunk native vlan 2 switchport mode private-vlan promiscuous switchport private-vlan mapping 2 add 3-5 ……… …….. 166 - Private VLAN (CLI) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 167 PVLAN Type primary isolated community community gi4,gi5 Switch# show vlan private-vlan port-list Ports Mode Vlan ----- ----------- ---- normal normal normal Host List normal normal normal host host host RocketLinx ES8509-XT User Guide: 2000557 Rev. D Private VLAN (CLI) - 167...

  • Page 168: Traffic Prioritization (Cli)

    The port trust is set DSCP first ok. Switch# show qos queue-sched Display – Queue QoS queue scheduling scheme : Weighted Round Robin (Use an Scheduling 8,4,2,1 weight) 168 - Traffic Prioritization (CLI) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 169 Map CoS 6 to Queue 3 The CoS to queue mapping is set ok. Switch(config)# qos cos-map 7 3 Map CoS 7 to Queue 3 The CoS to queue mapping is set ok. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Traffic Prioritization (CLI) - 169...
  • Page 170 4 | 2 2 2 2 2 2 2 2 3 3 5 | 3 3 3 3 3 3 3 3 3 3 6 | 3 3 3 3 170 - Traffic Prioritization (CLI) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 171: Multicast Filtering (Cli)

    Snooping - Global IGMP snooping is disabled globally ok. Switch(config)# no ip igmp snooping vlan 3 Disable IGMP Snooping - VLAN IGMP snooping is disabled on VLAN 3. RocketLinx ES8509-XT User Guide: 2000557 Rev. D Multicast Filtering (CLI) - 171...
  • Page 172 Switch(config-if)# ip igmp query-max-response-time 15 (Change Response Time query max response time to 15 seconds, default value is 10 seconds) Switch(config)# int vlan 1 Disable Switch(config-if)# no ip igmp 172 - Multicast Filtering (CLI) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 173 Send Unknown Multicast to All Ports Switch(config)# no mac-address-table multicast filtering Flooding unknown multicast addresses ok! Switch(config)# mac-address-table multicast filtering Discard All Unknown Filtering unknown multicast addresses ok! Multicast RocketLinx ES8509-XT User Guide: 2000557 Rev. D Multicast Filtering (CLI) - 173...
  • Page 174 8 : disabled port 9 : disabled Force Filtering Switch(config)# mac-address-table force filtering Enable Filtering unknown multicast addresses ok! Switch(config)# no mac-address-table force filtering Disable Flooding unknown multicast addresses ok! 174 - Multicast Filtering (CLI) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 175: Snmp (Cli)

    Switch# show running-config Display ..snmp-server community public ro snmp-server community private rw snmp-server enable trap snmp-server host 192.168.250.33 version 2 admin snmp-server host 192.168.250.33 version 1 admin …….. RocketLinx ES8509-XT User Guide: 2000557 Rev. D SNMP (CLI) - 175...

  • Page 176: Security (Cli)

    Set ip security enable ok. IP Security Switch(config)# ip security host 192.168.250.33 Add ip security host 192.168.250.33 ok. Switch# show ip security ip security is enabled Display ip security host: 192.168.250.33 176 - Security (CLI) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 177 Secondary RADIUS Server Key : 5678 Secondary RADIUS Server Port : 1812 Secondary RADIUS Accounting Port : 1813 User name/ Switch(config)# dot1x username chris passwd chris vlan 1 password for authentication RocketLinx ES8509-XT User Guide: 2000557 Rev. D Security (CLI) - 177...

  • Page 178: Warnings (Cli)

    Switch(config)# relay 1 power <1-2> power id Power Failure Anyone power failure asserts relay Switch(config)# relay 1 power 1 Switch(config)# relay 1 power 2 Super Ring Failure Switch(config)# relay 1 ring 178 - Warnings (CLI) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 179 Local Mode Switch(config)# log syslog local Switch(config)# log syslog remote Server Mode 192.168.250.33 Switch(config)# log syslog local Both Switch(config)# log syslog remote 192.168.250.33 Disable Switch(config)# no log syslog local RocketLinx ES8509-XT User Guide: 2000557 Rev. D Warnings (CLI) - 179...
  • Page 180 SMTP Email Alert set Server: 192.168.250.100, Account: admin@comtrol.com ok. Switch(config)# smtp-server receipt 1 abc@comtrol.com Receiver mail SMTP Email Alert set receipt 1: abc@comtrol.com ok. Switch(config)# smtp-server authentication username admin password admin Authentication with SMTP Email Alert set authentication Username: admin,...

  • Page 181: Monitor And Diag (Cli)

    Dynamic Switch# show mac-address-table multicast Show MAC Vlan Mac Address Status Ports Address Table ---- --------------- ---- ------- -------------------------- – Multicast 00c0.4e35.0800 gi5-6 MAC addresses 00c0.4e35.fffa gi3,gi5-6 RocketLinx ES8509-XT User Guide: 2000557 Rev. D Monitor and Diag (CLI) - 181...
  • Page 182 Switch(config)# mirror source gi1-2 both Mirror source gi1-2 both set ok. Note: Select source port list and TX/RX/Both mode. Select Switch(config)# mirror destination gi6 Destination Mirror destination gi6 set ok Port 182 - Monitor and Diag (CLI) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 183 64 bytes from 192.168.11.14: icmp_seq=3 ttl=128 time=0.0 ms 64 bytes from 192.168.11.14: icmp_seq=4 ttl=128 time=0.0 ms --- 192.168.11.14 ping statistics --- packets transmitted, 5 packets received, 0% packet loss round-trip min/avg/max = 1.3/1.3/1.4 ms RocketLinx ES8509-XT User Guide: 2000557 Rev. D Monitor and Diag (CLI) - 183...

  • Page 184: Saving To Flash (Cli)

    Switch(config)# service http disable Disable HTTP Switch(config)# Switch(config)# service http enable Enable HTTP Switch(config)# Switch(config)# service telnet disable Disable telnet Switch(config)# Switch(config)# service telnet enable Enable telnet Switch(config)# 184 - Saving to Flash (CLI) RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 185: Complete Cli List

    Complete CLI List This section provides the complete listing of RocketLinx ES8509-XT commands with the supporting options: • User EXEC Mode • Privileged EXEC Mode on Page 186 • Global Configuration Mode on Page 191 • Port Interface Configuration Mode on Page 196 •...

  • Page 186: Privileged Exec Mode

    (pdu|trace|debug|rapid-dual-homing|rstp|multi-ring|all) <0- 31> debug snmp debug spanning-tree (all|bpdu|config|events|general|root|sync|tc) debug sw-rate-limit get <0-64> debug sw-rate-limit set <0-64> <0-1000> debug sw-rate-limit set <0-64> off debug trunk 186 - Privileged EXEC Mode RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 187 [IFNAME] show administrator show arp show auth radius show clock show clock summer-time show clock timezone show debugging dot1x RocketLinx ES8509-XT User Guide: 2000557 Rev. D Privileged EXEC Mode - 187...
  • Page 188 [IFNAME] show lacp counters [GROUPID] show lacp group [1-8] show lacp internal [1-8] show lacp neighbor [1-8] 188 - Privileged EXEC Mode RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 189 RocketLinx ES8509-XT User Guide: 2000557 Rev. D Privileged EXEC Mode - 189...
  • Page 190 WORD telnet WORD PORT terminal length <0-512> terminal no length traceroute WORD write write file write memory write terminal 190 - Privileged EXEC Mode RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 191: Global Configuration Mode

    A.B.C.D/M (A.B.C.D|INTERFACE) <1-255> ip security ip security host A.B.C.D ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) lacp group <1-8> IFLIST lacp system-priority <1-65535> list lldp holdtime <10-255> lldp run RocketLinx ES8509-XT User Guide: 2000557 Rev. D Global Configuration Mode - 191...
  • Page 192 A.B.C.D/M (A.B.C.D|INTERFACE) <1-255> no ip security no ip security host A.B.C.D no ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) no lacp group <1-8> no lacp system-priority no lldp run 192 - Global Configuration Mode RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 193 MSTMAP priority no spanning-tree mst configuration no spanning-tree mst forward-time no spanning-tree mst hello-time no spanning-tree mst max-age no spanning-tree mst max-hops no spanning-tree priority no spanning-tree transmission-limit RocketLinx ES8509-XT User Guide: 2000557 Rev. D Global Configuration Mode - 193...
  • Page 194 A.B.C.D version (1|2) [COMMUNITY] snmp-server location .DWORD snmp-server name .DWORD snmp-server user WORD v3 auth (md5|sha) WORD snmp-server user WORD v3 noauth snmp-server user WORD v3 priv (md5|sha) WORD des WORD 194 - Global Configuration Mode RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 195 (independent|shared) warning-event (coldstart|warmstart) warning-event (linkdown|linkup) [IFLIST] warning-event authentication warning-event di 1 warning-event fault-relay warning-event loop-protect warning-event power <1-2> warning-event ring warning-event sfp warning-event time-sync write-config (daemon|integrated) RocketLinx ES8509-XT User Guide: 2000557 Rev. D Global Configuration Mode - 195...

  • Page 196: Port Interface Configuration Mode

    196 - Port Interface Configuration Mode RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 197 (access|uplink) switchport dot1q-tunnel mode uplink add-pvid switchport mode private-vlan host switchport mode private-vlan promiscuous switchport port-security switchport private-vlan host-association <2-4094> <2-4094> switchport private-vlan mapping <2-4094> add VLANLIST RocketLinx ES8509-XT User Guide: 2000557 Rev. D Port Interface Configuration Mode - 197...

  • Page 198: Vlan Interface Configuration Mode

    X:X::X:X/M list no description no ip address A.B.C.D/M no ip dhcp client no ip igmp no ipv6 accept-ra no ipv6 address X:X::X:X/M no shutdown quit shutdown 198 - VLAN Interface Configuration Mode RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 199: Modbus Tcp /Ip Support

    . The slave/ server can be any peripheral device that processes information and sends the output data to the master using Modbus TCP/IP protocol. RocketLinx ES8509-XT User Guide: 2000557 Rev. D ModBus TCP /IP Support - 199...

  • Page 200: Modbus Tcp/Ip Function Codes

    CRC to the message. The receiving device recalculates a CRC during receipt of the message, and compares the calculated value to the actual value it received in the CRC filed. 200 - Modbus TCP/IP Function Codes RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 201: Exception Response

    Word 1 Lo byte = ‘t’ Word 2 Hi byte = ‘r’ Word 2 Lo byte = ‘o’ Word 3 Hi byte = ‘l’ Word 3 Lo byte = ‘\0’ (other words = 0) RocketLinx ES8509-XT User Guide: 2000557 Rev. D Exception Response - 201...
  • Page 202 Word 1 Lo byte = reserved Firmware Release Date Firmware was released on 2010-08-11 at 09 o’clock 0x020A 2 words Word 0 = 0x0B09 Word 1 = 0x0A08 202 - Modbus TCP Register Table RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 203 1 word 0x0001:On 0xFFFF: unavailable 0x0000:Off 0x0402 1 word 0x0001:On 0xFFFF: unavailable 0x0000:Off 0x0403 1 word 0x0001:On 0xFFFF: unavailable 0x0404 to 0x040F 12 words Reserved address space RocketLinx ES8509-XT User Guide: 2000557 Rev. D Modbus TCP Register Table - 203...
  • Page 204 0xFFFF: unavailable 0x0414 to 0x041F 12 words Reserved address space 0x0420 1 word 0x0000:Off 0x0001:On 0x0421 1 word 0x0000:Off 0x0001:On 0x0422 1 word 0x0000:Off 0x0001:On 0x0423 1 word 204 - Modbus TCP Register Table RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 205 1 word 0x0001: on 0xFFFF: unavailable Default Port VLAN ID 0x12A0 to 0x12BF 1 word 0x0001-0xFFFF Ingress Filtering 0x12C0 to 0x12DF 1 word 0x0000: disable 0x0001: enable RocketLinx ES8509-XT User Guide: 2000557 Rev. D Modbus TCP Register Table - 205...
  • Page 206 SFP Information (32 Ports) 0x1500 to 0x151F 1 word SFP Type 0x1520 to 0x153F 1 words Wave length 0x1540 to 0x157F 2 words Distance 0x1580 to 0x167F 8 words Vender 206 - Modbus TCP Register Table RocketLinx ES8509-XT User Guide: 2000557 Rev. D...
  • Page 207 ExcessiveCollision 0x2780 to 0x27BF 2 words LateCollision 0x27C0 to 0x27FF 2 words Filtered 0x2800 to 0x283F 2 words FCSError 0x2840 to 0x29FF 447 words Reserved address space RocketLinx ES8509-XT User Guide: 2000557 Rev. D Modbus TCP Register Table - 207...

  • Page 208: Cli Commands For Modbus Tcp/Ip

    Communicate Session <1-20> Max Modbus TCP Master Switch(config)# modbus master 2 Set Modbus TCP Switch(config)# modbus port Listening Port <1-65536> Port Number Switch(config)# modbus port 502 208 - CLI Commands for Modbus TCP/IP RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

  • Page 209: Technical Support

    Technical Support Comtrol SFP Modules Comtrol provides a variety of SFP transceivers. These certified SFP transceivers can be identified by the RocketLinx ES8509-XT and displayed in the web user interface. We recommend using Comtrol SFP transceivers when configuring your RocketLinx ES8509-XT.
  • Page 210 Technical Support 210 - Comtrol Support RocketLinx ES8509-XT User Guide: 2000557 Rev. D...

Table of Contents