Table of Contents
Advertisement
Security | Network | ARP Inspection | Dynamic Table
Item
MAC Address
IP Address
Security | Network | ARP Inspection | Dynamic Table
Each page shows up to 99 entries
from the Dynamic ARP Inspection
table, default being 20, selected
through the entries per page input
field. Initially, the page shows the
first 20 entries from the beginning
of the Dynamic ARP Inspection
Table.
The Start from port address, VLAN,
MAC address and IP address input
fields allow you to select the
starting point in the Dynamic ARP
Inspection Table. Clicking the
Refresh button updates the
displayed table starting from that
or the closest next Dynamic ARP
Inspection Table match. In
addition, the two input fields will - upon a Refresh button click - assume that the value of the first displayed
entry, allowing for continuous refresh with the same start address.
The
button uses the last entry of the currently displayed table as a basis for the next lookup. When the
end is reached the text No more entries is shown in the displayed table. Use the
Item
Port
VLAN ID
MAC Address
IP Address
Translate to static
104 - Configuration Pages
Configuration | Security | Network | ARP Inspection | Static Table
Allowed Source MAC address in ARP request packets.
Allowed Source IP address in ARP request packets.
Click to add a new entry in the ARP Inspection Static table.
Configuration | Security | Network | ARP Inspection |
MP1204-XT port number for which the entries are displayed.
VLAN-ID in which the ARP traffic is permitted.
User MAC address of the entry.
User IP address of the entry.
Select the check box to translate the entry to static entry.
Updates the table starting from the first entry in the Dynamic
ARP Inspection Table.
Updates the table, starting with the entry after the last entry
currently displayed.
Dynamic Table
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
button to start over.
Advertisement
Table of Contents
