Item
General Settings
Enable Loop
Protection
Transmission
Time
Shutdown Time
Port Configuration
Port
Enable
Action
Tx Mode
Configuration | Spanning Tree Sub-Menus
The following menus are under the Configuration | Spanning Tree menu:
•
Spanning Tree | Bridge Settings
•
Spanning Tree | MSTI Mapping
•
Spanning Tree | MSTI Priorities
•
Spanning Tree | CIST Ports
•
Spanning Tree | MSTI Ports
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Configuration | Loop Protection
Controls whether loop protections is enabled (as a whole).
The interval between each loop protection PDU sent on each port, valid
values are 1 to 10 seconds.
The period (in seconds) for which a port is kept disabled in the event of
a loop is detected (and the port action shuts down the port). Valid
values are 0 to 604800 seconds (7 days). A value of zero keeps a port
disabled (until next device restart).
The MP1204-XT port number of the port.
Controls whether loop protection is enabled on the MP1204-XT port.
Configures the action performed when a loop is detected on a port.
Valid values are Shutdown Port, Shutdown Port and Log or Log Only.
Controls whether the port is actively generating loop protection PDU's,
or whether it is just passively looking for looped PDU's.
on Page 114
on Page 115
on Page 116
on Page 118
Configuration | Spanning Tree Sub-Menus
Configuration Pages - 111