Table of Contents
Advertisement
Configuration | Voice VLAN Menu
The following pages are under the Voice VLAN menu:
•
Voice VLAN | Configuration
•
Voice VLAN | OUI
Voice VLAN | Configuration
The Voice VLAN feature enables voice traffic forwarding on the Voice VLAN, then the switch can classify and
schedule network traffic. It is recommended that there be two VLANs on a port - one for voice, one for data.
Before connecting the IP device to the switch, the IP phone should configure the voice VLAN ID correctly. It
should be configured through its own GUI.
Item
Indicates the Voice VLAN mode operation. We must disable MSTP feature before we
enable Voice VLAN. It can avoid the conflict of ingress filtering. Possible modes are:
Mode
•
Enabled: Enable Voice VLAN mode operation.
•
Disabled: Disable Voice VLAN mode operation.
Indicates the Voice VLAN ID. It should be a unique VLAN ID in the system and cannot
VLAN ID
equal each port PVID. It is a conflict in configuration if the value equals management
VID, MVR VID, PVID etc. The allowed range is 1 to 4095.
Indicates the Voice VLAN secure learning aging time. The allowed range is 10 to
10000000 seconds. It is used when security mode or auto detect mode is enabled. In other
Aging Time
cases, it is based on hardware aging time. The actual aging time is situated between the
[age_time; 2 * age_time] interval.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
on Page 153
on Page 155
Configuration | Voice VLAN | Configuration
Configuration | Voice VLAN Menu
Configuration Pages - 153
Advertisement
Table of Contents
