Software | Image Select - Comtrol RocketLinx MP1204-XT User Manual

Software | Image Select

This page provides information about the active and alternate (backup) firmware images in the device, and
allows you to revert to the alternate image.
The page displays two tables with information about the active and alternate firmware images.
Notes:
1. In case the active firmware image is the alternate image, only the "Active Image" table is shown. In this
case, the Activate Alternate Image button is also disabled.
2. If the alternate image is active (due to a corruption of the primary image or by manual intervention),
uploading a new firmware image to the device automatically uses the primary image slot and activate
this.
3. The firmware version and date information may be empty for older firmware releases. This does not
constitute an error.
Item
Image
Version
Data
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Maintenance | Software |Image Select
The flash index name of the firmware image. The name of primary
(preferred) image is image, the alternate image is named image.bk.
The version of the firmware image.
The date where the firmware was produced.
Software | Image Select
Maintenance Pages - 265